Votos - 4, Puntuación media: 4
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
ADVANCED OPERATION English 63 En MANUAL SETUP MANUAL SETUP INPUT TRIM (Input trim) INPUT MENU Use to adjust the input level of the input source. Use to manually adjust the various parameters related to the audio and video input. SET MENU > MANUAL SETUP > INPUT MENU A)INPUT MODE B)INPUT TRIM C)INPUT RENAME [ ]/[ ]:Up/Down [ENTER]:Enter 3)INPUT MENU . pp ¦ INPUT MODE (Input mode) Use to designate the input mode for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit. For information on the types of audio signals that can be output by this unit, see “Selecting the input mode” on page 70. Choices: AUTO, LAST AUTO LAST [ ]/[ ]:Select [ENTER]:Return ppA)INPUT MODE p • Select AUTO to set this unit to automatically detect the type of input signals and select the appropriate input mode. • Select LAST to set this unit to automatically select the last input mode used for that input source. If the type of input signals is different from the setting, no sounds will be produced. TV/STB ANALOG;;;-3.0dB DIGITAL;;-3.0dB VCR ANALOG;;;-3.0dB DVD DIGITAL;;-3.0dB AUX DIGITAL;;-3.0dB [ ]/[ ]:Up/Down [ ]/[ ]:Sel [ENTER]:Return B)INPUT TRIM pp. pp • Select TV/STB ANALOG to adjust the level of audio and video signals input at the TV/STB AUDIO INPUT jacks of this unit. Control range: –6.0 dB to 0.0 dB Initial setting: –3.0 dB • Select TV/STB DIGITAL to adjust the level of audio and video signals input at the TV/STB OPTICAL DIGITAL INPUT jack of this unit. Control range: –6.0 dB to 0.0 dB Initial setting: –3.0 dB • Select VCR ANALOG to adjust the level of audio and video signals input at the VCR AUDIO INPUT jacks of this unit. Control range: –6.0 dB to 0.0 dB Initial setting: –3.0 dB • Select DVD DIGITAL to adjust the level of audio and video signals input at the DVD COAXIAL DIGITAL INPUT jack of this unit. Control range: –6.0 dB to 0.0 dB Initial setting: –3.0 dB • Select AUX DIGITAL to adjust the level of audio and video signals input at the AUX OPTICAL DIGITAL INPUT jack of this unit. Control range: –6.0 dB to 0.0 dB Initial setting: –3.0 dB 64 En MANUAL SETUP MANUAL SETUP INPUT RENAME (Input rename) Use to change the name of the input source in the OSD and the front panel display. Press an input selector button (e.g., DVD) to select the component you want to change the name for and perform the following procedure. C)INPUT RENAME DVD -> DVD p p [ ]/[ ]:Position [ ]/[ ]:Character [ENTER]:Return p p 1 Press / to place the _ (underscore) under the space or the character you want to edit. The _ (underscore) flashes. ENTER 2 Press / to select the desired character. • You can use up to 8 characters for each input. • Press to change the character in the following order or press to go in the reverse order: A to Z, a space, 0 to 9, a space, a to z, a space, #, *, +, etc. ENTER 3 Repeat steps 1 to 2 to rename each input. 4 Press ENTER to exit. The new names are registered, and the display returns to the previous screen. ENTER 65 En ADVANCED OPERATION English MANUAL SETUP MANUAL SETUP U Use to manually adjust the various parameters related to the display. SET MENU > MANUAL SETUP > DISPLAY MENU A)F.DISPLAY SET B)OSD SET C)UNIT SET [ ]/[ ]:Up/Down [ENTER]:Enter 4)DISPLAY MENU . pp ¦ F.DISPLAY SET (Front panel display settings) Use to adjust the brightness and display settings of the front panel display. STANDARD DIMMER;;;;;OFF AUTO DIMMER ;;;;;;;;;;;;;OFF [ ]/[ ]:Up/Down [ ]/[ ]:Sel [ENTER]:Return A)F.DISPLAY SET pp. pp STANDARD DIMMER (Standard dimmer) Use to adjust the brightness of the front panel display when you operate this unit by using the control buttons on the front panel or on the remote control. Choices: –2, –1, OFF AUTO DIMMER (Auto dimmer) If no operation is performed for a specified period of time, the front panel display dims. Use to adjust the brightness of the front panel display in this case. Choices: OFF (the same brightness as the STANDARD DIMMER setting), –1 to –3 (based on the STANDARD DIMMER setting), DISPLAY OFF ¦ OSD SET (OSD settings) Use to adjust the display position and to set the display time of the OSD. OSD SHIFT;;;;;;;;;;0 [ ]/[ ]:Select [ENTER]:Return B)OSD SET pp OSD SHIFT (OSD shift) Use to adjust the vertical position of the OSD. Adjust toward the – (minus) direction to raise the position of the OSD, and adjust toward the + (plus) direction to lower it. Choices: –5 to +5 Initial setting: 0 ¦ UNIT SET (Unit settings) Use this to change the display unit of measurement. Choices: METERS, FEET METERS FEET [ ]/[ ]:Select [ENTER]:Return ppC)UNIT SET p • Select METERS to enter distances in meters. • Select FEET to enter distances in feet. Note If you change this setting, the adjusted sound beam settings may change. 66 En Adjusting the audio balance Adjusting the audio balance Using the test tone You can use the test tone feature to output a test tone from each channel to manually balance the channel levels. Use this to set the channel levels so that the volume level of eac...