Votos - 2, Puntuación media: 3
(
)
)
|
Resumen del manual
REC OUT CD/DVDTUNER PHONO TAPE MD AUX 2 Play the source. 3 Select the source with the INPUT selector and adjust VOLUME to check the sound output. +– CD/DVDTAPEMD TUNERPHONOAUX l6 20 28 40 60 l2 8 4 2 0 –dB +– +– VOLUME 4 Begin recording on the tape deck (or MD recorder). 5 The sound of the recording can be monitored by selecting the tape deck (or MD recorder) with the INPUT selector. +– CD/DVDTAPEMD TUNERPHONOAUX 6 Listening to another source by selecting it with the INPUT selector will not affect the recording. English English AX-396 14 VOLUME l6 20 28 40 60 l2 8 4 2 0 –dB PHONES BASS 5 5 4 3 2 l 0 l 2 3 4 TREBLE 5 5 4 3 2 l 0 l 2 3 4 BALANCE 5 5 4 3 2 l 0 l 2 3 4 L R SPEAKERS A ON OFF B STANDBY/ON POWER ON OFF STANDBY INPUT CD/DVD DIRECT AMPAUX PHONOTUNERCD/DVDTAPEMD LOUDNESS 5 6 7 4 3 2 l FLAT I0 —30dB 9 8 REC OUT CD TUNER PHONO TAPE MD AUX TAPE MONITOR 21 1 Select the source you want to record. 2 Play the source and then turn VOLUME up to check the sound output. +– CD/DVDTAPEMD TUNERPHONOAUX l6 20 28 40 60 l2 8 4 2 0 –dB +– +– VOLUME AUX PHONOTUNERCD/DVDTAPEMD 3 Begin recording on the tape deck (or MD recorder). 4 If the tape deck is used for recording, you can monitor the sound of recording. To monitor the sound of recording, light up the TAPE MONITOR indicator by pressing TAPE MONITOR. Note Turn off the TAPE MONITOR indicator when the recording is finished by pressing TAPE MONITOR. TAPE MONITOR Notes on recording . The VOLUME, BASS,TREBLE, BALANCE, LOUDNESS controls and CD/DVD DIRECT AMP switch (and PURE DIRECT switch for AX-496 only) have no effect on the material being recorded. . Please check the copyright laws in your country to record from records, compact discs, radio, etc. Recording of copyright material may infringe on copyright laws. E-11 m Sound control Adjusting the BALANCE control Adjust the balance of the output volume to the left and right speakers to compensate for sound imbalance caused by speaker location or listening room conditions. BALANCE 0 l l 2 2 3 3 4 4 L5 5R Using the CD/DVD DIRECT AMP switch You can enjoy the purest possible sound from your CD or DVD player by pressing this switch. The indicator above it lights up. With this function on, input signals from the CD or DVD player are sent directly to the built-in special amplifier for CD/DVD bypassing the INPUT selector, the BASS, TREBLE, BALANCE and LOUDNESS controls (and the TAPE MONITOR switch for AX-396 only), and then sent to the power amplifier. This signal routing reproduces the purest sound eliminating any alterations to the CD or DVD signals. CD/DVD DIRECT AMP Using the PURE DIRECT switch AX-496 only You can enjoy the purest possible sound from your audio sources by pressing this switch. The indicator above this switch lights up. With this function on, the audio signals bypass the BASS, TREBLE, BALANCE and LOUDNESS controls, thus eliminating any alterations to the audio signals. PURE DIRECT Note If both the CD/DVD DIRECT AMP and PURE DIRECT switches are on, only the CD/DVD DIRECT AMP switch will function. Adjusting the BASS and TREBLE controls BASS TREBLE 00 l ll l 2 22 2 3 33 3 4 44 4 55 55 BASS: Turn this knob clockwise to increase (or counterclockwise to decrease) the low frequency response. TREBLE: Turn this knob clockwise to increase (or counter clockwise to decrease) the high frequency response. Adjusting the continuously variable LOUDNESS control This control compensates for the human ears’ loss of sensitivity to high and low-frequency ranges at low volume. This control is adjustable to retain full tonal range at any volume level. 1 LOUDNESS FLAT Set to the “FLAT” position. l —30dB 2 I0 3 9 4 8 5 76 2 l6 20 28 40 60 l2 8 4 2 0 –dB Set to the loudest listening level that you would listen to. LOUDNESS 3 l FLAT —30dB Turn until the desired volume is 2 I0 obtained. 3 9 4 8 5 76 WARNING If the CD/DVD DIRECT AMP switch (or PURE DIRECT switch for AX-496 only) is pressed to turn it on with the LOUDNESS control set at a certain level, the sound will suddenly increase and may damage your ears or the speakers. (The LOUDNESS control function may be bypassed.) For this reason, be sure to press the CD/ DVD DIRECT AMP switch (or PURE DIRECT switch for AX-496 only) after lowering the volume or after checking that the LOUDNESS control is properly set. TROUBLESHOOTING Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instructions given below do not help, disconnect the power cord and contact your authorized YAMAHA dealer or service center. English Problem Cause What to Do The unit cannot be turned on or turns off suddenly soon after the power is turned on. Power cord is not plugged in nor completely inserted. Firmly plug in the power cord. The IMPEDANCE SELECTOR switch on the rear panel is not set to either end. Set the switch to either end when this unit is off. This unit does not work normally. There is an influence of strong external noise (ligh...