Votos - 4, Puntuación media: 3.8
(
)
)
|
Resumen del manual
2 Multi-information display This display shows various information: for example the name of the selected DSP program and the various settings during adjustment with the SET MENU. 3 Input source indicators One of the arrows for these indicators lights up depending on which source is selected. 4 TAPE/MD MONITOR indicator This lights up when the tape deck or MD recorder, etc. is selected as the input source by pressing TAPE/MD MON / 6CH INPUT (or TAPE/MD). 8 5 gand o indicators “ g” lights up when the built-in Dolby Digital decoder is on. “ o” lights up when the built-in Dolby Pro Logic decoder is on. 6 xindicator “ x” lights up when the built-in digital sound field processor is on. 7 DSP program indicators These indicators light up when DSP program No. 2, 3 or the subprogram “ENHANCED” of No. 1 is selected. 8 SLEEP indicator This lights up while the built-in SLEEP timer is on. English E-5 CONTROLS AND FUNCTIONS CONTROLS AND FUNCTIONS Remote Control 1 7 28 9 3 40 5 POWER PROGRAM /DTS SUR. 21 4 MOVIE THTR 1 3 MOVIE THTR 2 MONO MOVIE 7 ROCK TEST TIME/LEVEL 6CH INPUT SET MENU 5 TV SPORTS 8 HALL 6 DISCO EFFECT CD TUNER TAPE/MD DVD/LD D–TV VCR CBL/SAT SLEEP MUTING +VOLUME– q 6w e 1 POWER Each time you press this button, the unit switches between the power on and standby mode. 2 TEST Press this button to output the test tone for each speaker. 3 l(left), h(right) These buttons adjust the setting of the SET MENU and TIME/LEVEL mode. 4 TIME/LEVEL Press this button to select the items in the TIME/LEVEL mode. 5 6CH INPUT Press this button to select the source connected to the 6CH INPUT terminals. 6 SLEEP Press this button to set the SLEEP timer. 7 PROGRAM selector buttons These buttons select a DSP program. 8 EFFECT Press this button to turn on or off the effect speakers (center and rear). 9 (next), (back) These buttons are used to advance or go back one selection on the SET MENU and TIME/LEVEL mode. 0 SET MENU Press this button to select the items on the SET MENU. q Input selector buttons These buttons select the input source. CD: To play a CD TUNER: To listen to an FM or AM broadcast TAPE/MD: To play a tape or MD DVD/LD: To play a DVD or LD D-TV: To watch a TV VCR: To play a video cassette CBL/SAT: To watch cable TV or satellite broadcast w MUTING Press this button to mute the sound. To cancel mute, press this button again. e VOLUME +/– These buttons are used to adjust the volume level. +: To turn up the volume –: To turn down the volume SPEAKER SETUP Speakers to Be Used This unit is designed to provide the best sound-field quality with a 5-speaker system, using main speakers, rear speakers and a center speaker. If you use different brands of speakers (with different tonal qualities) in your system, the tone of a moving human voice and other types of sound may not shift smoothly. We recommend that you use speakers from the same manufacture or speakers with the same tonal quality. The main speakers are used for the main source sound plus the effect sounds. They will probably be the speakers from your present stereo system. The rear speakers are used for the effect and surround sounds, and the center speaker is for the center sounds (dialog, vocals, etc.). If for some reason it is not practical to use a center speaker, you can do without it. Best results, however, are obtained with the full system. The main speakers should be high-performance models and have enough power-handling capacity to accept the maximum output of your audio system. The other speakers do not have to be equal to the main speakers. For precise sound localization, however, it is ideal to use high- performance models that can reproduce sounds over the full range for the center speaker and the rear speakers. ¦ Use of a subwoofer expands your sound field It is also possible to further expand your system with the addition of a subwoofer. The use of a subwoofer is effective not only for reinforcing bass frequencies from any or all channels, but also for reproducing the LFE (low frequency effect) channel with high fidelity when playing back a source encoded with Dolby Digital or DTS. The YAMAHA Active Servo Processing Subwoofer System is ideal for natural and lively bass reproduction. Speaker Placement Refer to the following diagram when you place the speakers. Subwoofer Main speaker (L) Center speaker Rear speaker (L) 1.8 m Rear speaker (R) Main speaker (R) ¦ Main speakers Place the right and left main speakers an equal distance from the ideal listening position. The distance of each speaker from each side of the TV monitor should be the same. ¦ Rear speakers Place these speakers behind your listening position, facing slightly inwards, nearly 1.8 m (approx. 6 feet) above the floor. ¦ Center speaker Align the front face of the center speaker with the front face of your TV monitor. Place the speaker as close to the monitor as possible, such as directly over or under the monitor and centrally between the main speakers. Note • If the center speaker is not used...