Iniciar sesión:
Votos - 2, Puntuación media: 4 ( )

Manual de usuario Yamaha, modelo AM802

Fabricar: Yamaha
Tamaño del archivo: 1.79 mb
Nombre del archivo:
Idioma del manual:enfrde
Enlace gratuito para este manual disponible en la parte inferior de la página



Otros manuales para este modelo:

Resumen del manual


Stereo inputs are provided for each AUX RTN input, providing compatibility with the many mono-in/ stereo-out signal processors currently available. STEREO L & R Faders The STEREO L and STEREO R faders independently adjust the level of the signal sent from the left and right master stereo busses to the L and R ST OUT jacks. POWER Switch (Rear panel) Flip to the ON position to turn power ON, or to the OFF position to turn power OFF. The POWER indicator LED will light when the power switch is turned ON. r CAUTION: - Make sure the STEREO L and R faders are set to minimum when turning the POWER switch ON. -4- CONTROLS & CONNECTORS CONNECTORS INPUT Connectors The AM802 has a total of 8 input channels, each of which has a single 1/4" monaural phone INPUT jack. See “ 1 . MIC/LINE Switch” for a description of the MIC/LINE switches associated with INPUT jacks 1 through 6. When a MIC/LINE switch is set to MIC, the input level and impedance for that channel are set to -50 dB/50—600 ohms. When set to LINE, the input level and impedance are -10 dB/600 ohms. The input level and impedance for INPUTS without MIC/LINE switches are -10 dB/600 ohms. NOTE: - Since channels 7 and 8 are designed to handle stereo signals, they have two input jacks each (L and R) rather than the single input, jacks provided on all other channels. ® AUX SND Jacks These jacks deliver the AUX 1, AUX 2 and AUX 3 mixes, respectively, to feed an external signal processor, performer’s headphone cue system, a monitor system, etc. Nominal output level and impedance of the AUX send jacks are -10 dB/10 kohms.


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría