Votos - 1, Puntuación media: 5
(
)
)
|
Resumen del manual
The KM602 is a compact 6 in 2 out mixer especially designed with today's music in mind. It features a built-in chorus and stereo effects return. A unique space-saving design with highly visual faders make it a pleasure to use. In order to obtain the highest possible performance and make the most of the KM602's features, please read this owner's manual carefully. CONTENTS FEATURES...............................1 PRECAUTIONS ..........................1 CONTROL PANEL OPERATION ...........2 INPUT SECTION .......................2 MASTER SECTION .....................2 REAR PANEL ............................3 BLOCK DIAGRAM .......................3 EXAMPLE SETUP ........................4 SPECIFICATIONS ........................5 FEATURES • Built-in chorus for rich sound. • Stereo effect return lets you enjoy the full spacious sound of effect devices with stereo outputs. • Highly visible fader position markers let you see volume settings even on dimly lighted stages. • Stereo headphone monitoring jack with volume control independent from main output. PRECAUTIONS LOCATION Avoid placing the KM602 in direct sunlight or close to a source of heat. Also, avoid locations in which the device is likely to be subjected to vibration, excessive dust, cold or moisture. HANDLING Avoid applying excessive force to the switches, dropping or rough handling. While the internal circuitry is of reliable, integrated circuit design, the KM602 should be treated with care. POWER CORD Always grip the plug directly when removing it from an AC receptacle. Removing the plug from the AC receptacle by pulling the cord can result in damage to the cord, and possible a short circuit. It is also a good idea to disconnect the KM602 from the AC receptacle if you don't plan to use the device for an extended period of time. CONNECTIONS Before plugging or unplugging inputs, turn the power off or the volume down. DO NOT OPEN THE CASE There are no user-serviceable parts inside. CLEANING Use only a mild detergent on a cloth, and dry with a soft cloth. Never use solvents (such as benzine or thinner) since they can melt or discolor the surface. - 1 - CONTROL PANEL OPERATION 3 А 6 - RTN-R_SEND L_R_ PHONES AUX STEREO OUT (D- (D- (D- ©- (D- UNE MIC OFF ON * -О AUX Ю. О CHORUS OFF ON О OFF ON О o^^io Q YAMAHA a -© ® GAIN SELECT (Input 1 only) When using this input with a low-level source such as a microphone, set GAIN SELECT to MIC position. For line-level instruments such as synthesizers, set it to LINE position. (2) CHORUS (Inputs 1-4) When CHORUS is selected, the input signal will be processed through the built-in chorus, and will be placed in the center of the left-right mix (i.e. PAN will not function). (D AUX (Input 1-4) This sends the post-fader signal to the aux output. (4) PAN (Input 1 -6) This sets the stereo position of the post-fader signal. PAN for channels 1 -4 will function only when CHORUS is turned off.