Votos - 2, Puntuación media: 4.5
(
)
)
|
Otros manuales para este modelo:
Instrumentos Musicales - M2500-32 (128.49 kb)
Instrumentos Musicales - M2500-32 (128.49 kb)
Instrumentos Musicales - M2500-32 (4.29 mb)
Resumen del manual
The pin wiring is as follows. RCA phono plug Tip (send) Sleeve (ground) E INPUT jacks These are TRS phone input jacks (balanced) for stereo input channels 2–4. Nominal input level is +10 dB to –30 dB. The pin wiring is as follows. Hot Cold Ground If you wish to input a monaural signal to stereo input channels 2–4, insert a plug only into the L/MONO jack. In this case, the signal that is input to the L/ MONO jack will be sent to both L and R of the stereo input channel. 26 M2500—Owner’s Manual Rear panel Rear panel L 654 321 AUX OUT +4dB SUB IN +4dBINSERT I/O +4dB 13 MATRIX OUT +4dBST OUT +4dB MIDI 15 26 37 48 AUX 24 GRP/AUX OUT +4dB G1/ A7 G5/ A11 G2/ A8 G6/ A12 G3/ A9 G7/ A13 G4/ A10 G8/ A14 AUX/GRP OUT +4dB A7/ G1 A11/ G6 A8/ G2 A12/ G6 A9/ G3 A13/ G7 A10/ G4 A14/ G8 5 L MONO /C R MONITOR OUT L MONO /C R IN OUT THRU 6 MATRIX LR123456 ST LMONO/CST RST LMONO/CST R G1/A7G2/A8G3/A9G4/A10G5/A11G6/A12G7/A13G8/A14 +4dB KJ AAUX OUT jacks These are XLR-3-32 output jacks (balanced) that individually output the signals of each channel of the AUX 1–6 section. Nominal output level is +4 dB. The pin wiring is as follows. 2 (hot) Female XLR plug 3 (cold) 1 (ground) B GRP/AUX OUT jacks These are XLR-3-32 output jacks (balanced) that individually output the signals of each channel of the G1/A7–G8/A14 section. Nominal output level is +4 dB. The pin wiring is as follows. 2 (hot) Female XLR plug 3 (cold) 1 (ground) 9 87 C AUX/GRP OUT jacks These are XLR-3-32 output jacks (balanced) that individually output the signals of each channel of the A7/G1–A14/G8 section. Nominal output level is +4 dB. The pin wiring is as follows. 2 (hot) Female XLR plug 3 (cold) 1 (ground) D MATRIX OUT jacks These are XLR-3-32 output jacks (balanced) that individually output the matrix 1–8 signals. Nominal output level is +4 dB. The pin wiring is as follows. 2 (hot) Female XLR plug 3 (cold) 1 (ground) M2500—Owner’s Manual 27 Rear panel Rear panel 2 (hot) Female XLR plug 3 (cold) 1 (ground) F MONITOR OUT jacks These are XLR-3-32 output jacks (balanced) that output the signal of the stereo/monaural master section, or the monitor source that is selected by the control panel. Nominal output level of each jack is +4 dB. The pin wiring is as follows. 2 (hot) Female XLR plug 3 (cold) 1 (ground) Note: When outputting the monitor source selected by the control panel, only the MONITOR OUT L/R jacks are used. G SUB IN MATRIX jacks These are 1/4" phone jacks (unbalanced) for mixing a line level signal from an external device into the MATRIX bus. Nominal input level is +4 dB. The pin wiring is as follows. Tip (send) 1/4" phone plug Sleeve (ground) H SUB IN ST L/R, MONO/C jack These are 1/4" phone jacks (unbalanced) for mixing a line level signal from an external device into the STEREO bus L/R and MONO/C bus respectively. Nominal input level is +4 dB. The pin wiring is as follows. Tip (send) 1/4" phone plug Sleeve (ground) Tip (send) 1/4" phone plug 1/4" phone plug 1/4" TRS phone plug To processor’s input From processor’s output Connect to INSERT I/O jack Tip (send) Ring (return) Sleeve (ground) Sleeve (ground) Tip (return) Sleeve (ground) J INSERT I/O AUX jacks These are TRS phone jacks for inserting an external effect processor into each output channel of the AUX 1–6 section. Nominal input level is 0 dB. The pin wiring is as follows. Tip (send) 1/4" phone plug 1/4" phone plug 1/4" TRS phone plug To processor’s input From processor’s output Connect to INSERT I/O jack Tip (send) Ring (return) Sleeve (ground) Sleeve (ground) Tip (return) Sleeve (ground) K INSERT I/O ST L/R, MONO jacks These are TRS phone jacks for inserting an external effect processor into each output channel of the stereo/ monaural master section. Nominal input level is 0 dB. The pin wiring is as follows. Tip (send) 1/4" phone plug 1/4" phone plug 1/4" TRS phone plug To processor’s input From processor’s output Connect to INSERT I/O jack Tip (send) Ring (return) Sleeve (ground) Sleeve (ground) Tip (return) Sleeve (ground) 28 M2500—Owner’s Manual Rear panel M2500—Owner’s Manual 29 L MIDI connectors These are standard five-pin MIDI connectors. By connecting these to a sequencer or to the MIDI interface of a computer, scenes can be selected from an external device, or scene memories can be backed up. MIDI IN connector MIDI data is received at this connector. Use a MIDI cable to connect this to the MIDI OUT connector of your external MIDI device. MIDI OUT connector MIDI data is transmitted from this connector. Use a MIDI cable to connect this to the MIDI IN connector of your external MIDI device. MIDI THRU connector Data received at the MIDI IN connector is re-transmitted without change from this connector. For example if you have connected three M2500 units via MIDI as shown below, switching scenes on the master M2500 (1) can cause the slave M2500 units (2/3) to switch scenes in the same way. M PHANTOM MASTER switch This is the master switch for the +48 V phantom power supply. N DC POWER INPUT c...
Otros modelos de este manual:Instrumentos Musicales - M2500-24 (1.65 mb)
Instrumentos Musicales - M2500-40C (1.65 mb)
Instrumentos Musicales - M2500-48C (1.65 mb)
Instrumentos Musicales - M2500-56C (1.65 mb)