Votos - 3, Puntuación media: 4.3
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
When the switch is ON (>), the signal is sent to the relative bus. o Channel Fader Controls the output level of the input channel signal and adjusts the volume balance between channels. * Levels of unused faders should be lowered. Front & Rear Panels 3 CH INPUT MX12/6:1~4ch MX20/6:1~8ch MIC INPUT [-60~-16dB] LINE INPUT [-34~+10dB] INSERT I/O [0dB] PAD PHANTOM (8ch/sw) from DC Power Supply HA GAIN [-60dB~-16dB] [-34dB~+10dB] [0dB] Lo Mid Hi 3-Stage EQ PEAK Ch.Fader [-10dB] BA [0dB] [0dB] 1-2 3-4 ST [-6dB] PAN POST AUX1 AUX2 EFFECT CH INPUT MX12/6:5~8ch MX20/6:9~16ch MIC INPUT [-60~-16dB] LINE INPUT [-34~+10dB] from DC Power Supply PHANTOM (8ch/sw) PAD HA GAIN [-60dB~-16dB] [-34dB~+10dB] [0dB] Lo Mid Hi 3-Stage EQ PEAK Ch.Fader [-10dB] BA [0dB] [0dB] 1-2 3-4 ST [-6dB] PAN POST AUX1 AUX2 EFFECT ST INPUT MX12/6: 9/10ch, 11/12ch MX20/6:17/18ch, 19/20ch [-34~+10dB] L R HA HA [0dB] GAIN [-34dB~+10dB] 3-Stage EQ Lo Mid Hi 3-Stage EQ PEAK BA BA ST Ch.Fader [-10dB] [0dB] SUM BAL [0dB] POST 1-2 3-4 ST [-6dB] AUX1 AUX2 EFFECT STEREO R EFFECT STEREO L GROUP4 GROUP3 GROUP2 GROUP1 AUX1 AUX2 MX12/6, 20/6 — Owner’s Manual 4 Front & Rear Panels q !2 !0 e r i w !1 o !3 !4 t y u q ST Master Fader Controls the level of the signal that is sent to the ST OUT jacks. w MONO Control Controls the level of the signal (the monaural signal that is formed by combining the signals from the STEREO bus) that is sent to the MONO OUT jack. e GROUP 1-4 Faders r TO ST Switch Controls the level of the GROUP 1-4 signals, and sends the signals to their respective GROUP OUTPUT 1-4 jacks. Also, when the TO ST switch is ON (>), the signals whose levels are controlled by the GROUP faders are also sent to the STEREO bus. t SEND • AUX1, AUX2 Controls Controls the individual levels of the AUX1 and AUX2 signals that are sent to the AUX1 SEND jack and AUX2 SEND jack. • EFFECT Control Controls the level of the EFFECT bus signal that is sent to the EFFECT SEND jack. * This control is not related to, and has no affect on the signal that is sent from the EFFECT bus to the built-in digital effects. y RETURN • AUX1, AUX2 Controls Controls the levels of the signals (mixed, L with R) that are sent to the AUX1 and AUX2 buses from the RETURN L (MONO) and R jacks. • ST Control Controls the level of the signal that is sent from the RETURN L(MONO), R jacks to the STEREO bus. * When only the RETURN L (MONO) jack is used, the same signal is also sent to the STEREO bus L, R. Master Control Section Front & Rear Panels 5 u DIGITAL EFFECT • PROGRAM Select Switch Selects a program from the built-in digital effects. VOCAL ECHO 1 VOCAL REVERB 1 HALL 1 PLATE 1 VOCAL ECHO 2 VOCAL REVERB 2 HALL 2 PLATE 2 VOCAL ECHO 3 VOCAL REVERB 3 HALL 3 PLATE 3 VOCAL ECHO 4 VOCAL REVERB 4 ROOM GATE REVERB • PARAMETER Control Controls parameters (effect level, speed, etc.) of the selected effect program. • ON Switch Switches the built-in digital effect ON (>) or OFF (?). When set to OFF, the signal from the built- in effect is not sent. • AUX1, AUX2 Control Controls the level of the signal that is sent from the built-in digital effects to the AUX1 and AUX2 buses. • ST Control Controls the level of the signal that is sent from the built-in digital effects to the STEREO bus. i TAPE IN Control Controls the level of the signal that is sent from the TAPE IN jack to the STEREO bus. o ST GRAPHIC EQUALIZER A stereo 7-band graphic equalizer that offers tone adjustment to the signal that is output to the ST OUT jacks. A +/-12dB boost or cut is provided at each of the frequency bands 125, 250, 500, 1k, 2k, 4k and 8kHz. !. C-R/PHONES Output and Meter Select Switch Selects the signal that is sent to the C-R/PHONES jack and the level meter. The three switches are used in combination to select TAPE IN, ST, GROUP 1-2 and GROUP 3-4 signals. Signal Switch ? 1-2 > 3-4 ? ST > GROUP ? > TAPE IN TAPE IN N/A N/A > TAPE IN ST N/A ? ST ? GROUP 1-2 ? 1-2 > GROUP ? GROUP 3-4 > 3-4 > GROUP ? !. C-R/PHONES Control Controls the level of the signal that is sent to the C-R/PHONES jack. !. LEVEL Meter The LEDs indicate the output level of the signal selected with the C-R/PHONES output and Meter Select Switch !0 . “0” indicates a nominal level, and the PEAK indicator will light when clipping is imminent. !. POWER Indicator The indicator will light when the main unit’s power is ON. !. LAMP Connector A BNC type lamp (AC or DC12V, 0.5A Max) can be attached here. Refer to the Block Diagram on page 13. MX12/6, 20/6 — Owner’s Manual 6 Front & Rear Panels 6 Front & Rear Panels n qwrt e q INPUT Jacks (MX12/6:CH1-8, MX20/6:CH1-16) • MIC Balanced XLR type microphone input jacks (1:Ground, 2:Hot, 3:Cold). These input jacks are compatible with 50-600. microphones. • LINE Balanced TRS phone type line input jacks (T:Hot, R:Cold, S:Ground). These input jacks are compatible with 600. line level devices. Unbalanced phone plugs can be connected but noise may enter the signal if the cables are too long or if the location is susceptible to electroma...
Otros modelos de este manual:Instrumentos Musicales - MX20/6 (1.01 mb)