Votos - 3, Puntuación media: 4 ( )

Fabricar: Yamaha Tamaño del archivo: 5.01 mb Nombre del archivo: Idioma del manual:

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. * This applies only to products distributed by YAMAHA - KEMBLE MUSIC (U.K.) LTD. Professional audio mixing console Typ : PM4000 82/499/EWG YAMAHA Europa GmbH This product complies with the radio frequency interference requirements of the Council Directive 82/499/EEC and/or 87/308/EEC. YAMAHA CORPORATION MICROPHONE CABLES AND MICROPHONES CONNECTION TO PREVENT HAZARD OR DAMAGE, ENSURE THAT ONLY MICROPHONE CABLES AND MICROPHONES DESIGNED TO THE IEC268-15A STANDARD ARE CONNECTED. If you are an engineer or technician who is familiar with sound system design, much of this manual will serve as a review for you. The basic features are presented in the “BRIEF OPERATING INSTRUCTIONS” section. Check this and the “SPECIFICATIONS” section, and you will see most of what you need to know. The balance of this manual provides background information for better utilization of the console and auxiliary equipment. If you would like to know more about AC power distribution and safety, grounding, balanced versus unbalanced cables, direct boxes, and so forth, this information is also presented. Check the TABLE OF CONTENTS. There are internal preset switches within the console which can be configured to change the functions and/or signal paths in certain circuits. Refer to the OPTIONAL FUNCTIONS section for details. Terminology and Typographic Conventions Generally, where we refer to a particular control or function as it is actually labeled on the console, we will use all upper case type. That is, if we refer to an input channel’s gain control, we may print “the input GAIN control.” On the other hand, if the feature is not labeled, we will use upper case type only on the first letter; for example, “observe there is no identification of the input Fader.” If the front panel label is incomplete or ambiguous, we may augment it. For example, the input channel pushbutton switches labeled “1, 2, 3, 4, 5, 6, 7, 8” may be accompanied by the parenthetic reference “(group bus assign)“. There are eight groups (or subgroups, depending on your linguistic preference). The group faders are known as “Group Master Faders”. Their function is to control the level on the eight “Group Mixing Busses. The eight group busses are different and distinct from the eight “Auxiliary Mixing Busses. The Stereo Fader is actually a pair of closely spaced faders (L and R); when we refer to the general function, we use the term “Stereo Fader,” but if the availability of separate left and right control is important, we may use the plural “Stereo Faders.” Particularly important information is distinguished in this manual by the following notations: NOTE: A NOTE provides key information to make procedures or functions clearer or easier. CAUTION: A CAUTION indicates special procedures or guidelines that must be observed to avoid damage to the console or related equipment, or to avoid an undesirable result while using the console. WARNING: A WARNING indicates special procedures or guidelines that must be observed to avoid injury to the operator or others using or exposed to the console or related equipment. In the BRIEF OPERATING INSTRUCTIONS section of this manual, each feature is provided with a numerical reference. Elsewhere, if we are referring to that feature, we may cite the reference number in square brackets for clarity. For example, on the input module, the fourth control to be described is the PAN pot. In other places on the console there are other PAN pots. For clarity, then, if we are discussing this particular input PAN pot, we will describe it like this: "the PAN pot [2]". Now, here’s a real warning that Underwriters Laboratories says we have to print: Warning: To prevent fire or shock hazard, do not expose this applianceto rain or moisture. Page A-1 s Page Sect. Title Section 1. Introduction Section 2. Brief Operating Instructions 2-1 2.1 PM4000 Front Panel Features 2-1 2.1.1 The Standard Monaural Input Module 2-7 2.1.2 The Stereo Input Module 2-12 2.1.3 The Master Module (1 - 8) 2-17 2.1.4 The Stereo Master Module 2-19 2.1.5 The TB (Talkback) Module 2-22 2.1.6 The Monitor Module 2-25 2.1.7 The Meter Bridge 2-27 2.2 PM4000 Rear Panel Features 2-34 2.4 The PW4000 Power Supply Section 3. Specifications 3-1 PM4000 Mixing Console General Specifications 3-2 PW4000 Power Supply Specifications 3-3 PM4000 Input Characteristics 3-3 PM4000 Output Characteristics 3-4 Dimensional Drawings 3-7 Block Diagrams Section 4. Installation Notes Planning An Installation 4-1 4.1 4-1 4.2 Power Mains 4-1 4.2.1 Verify The Correct Mains Voltage 4-1 4.2.2 Ensure There is a Good Earth Ground 4-2 4.2.3 How To Obtain a Safety Ground When Using a 2-wire Outlet 4-3 4.2.4 Improperly Wired AC Outlets: Lifted Grounds 4-3 4.2.5 Improperly Wired AC Outlets: Lif...

Descargar ahora

Introduzca dos números de la imagen: