Votos - 3, Puntuación media: 3.7
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
6 Press the SPLIT button again to unsplit the keyboard and return it to normal. SPLIT Main Tone (STRINGS)Split Tone (PIZZICATO STRINGS) Split point Using Layer and Split Together You can use layer and split together to created a layered split keyboard. It makes no difference whether you layer tones first and then split the keyboard, or split the keyboard and then layer tones. When you use layer and split in combination, the high range of the keyboard is assigned two tones (main tone + layered tone), and the low range two tones (split tone + layered split tone). To split the keyboard and then layer tones 1 Press the TONE button and then input the tone number of the main tone. Br a s s 2 Press the SPLIT button and then input the number of the split tone. Pi z z . S t r Indicator appears • After specifying the split tone, press the SPLIT button to unsplit the keyboard. 3 Press the LAYER button and then input the number of the layered tone. • Note that you can reverse steps 2 and 3, specifying the layered tone first and then the split tone. Fr . H o r n Indicator appears 4 Press the SPLIT button or the LAYER button so both of the SPLIT and LAYER indicators are displayed. 5 Input the number of the layered split tone. St r i n g s 6 Specify the split point. • While holding down the SPLIT button, press the keyboard where you want the leftmost key of the low end range to be. 704A-E-049A E-47 CTK591_e_46-58.p65 47 03.10.7, 4:27 PM Keyboard Settings 7Play something on the keyboard. • Press the LAYER button to unlayer the keyboard, and the SPLIT button to unsplit it. LAYER SPLIT RHYTHMSETTING SPLIT LAYER Number buttons [+] / [–] KEY CONTROL/ TRANSPOSE Split Tone (PIZZICATO STRINGS) + Layered Split Tone (STRINGS) Main Tone (BRASS) + Layered Tone (FRENCH HORN) Split point Transposing the Keyboard Transpose lets you raise and lower the overall key of the keyboard in semitone units. If you want to play an accompaniment for a vocalist who sings in a key that’s different from the keyboard, for example, simply use transpose to change the key of the keyboard. T o transpose the keyboard 1Press the RHYTHM button to enter the Rhythm Mode. • Note that you cannot transpose the keyboard while in the Song Bank Mode or Piano Bank Mode. 2Use the KEY CONTROL/TRANSPOSE buttons ( / ) to change the key of the keyboard. : Raises the key by one semitone : Lowers the key by one semitone Example: To transpose the keyboard five semitones upwards. Tr a n s . NOTE • The keyboard can be transposed within a range of –12 (one octave downwards) to +12 (one octave upwards). • The default transpose setting is “00” when keyboard power is turned on. • If you leave the transpose screen on the display for about five seconds without doing anything, the screen is automatically cleared. • The transpose setting also affects playback from memory and Auto Accompaniment. • To return the keyboard to its default key, perform the above procedure and press both of the KEY CONTROL/ TRANSPOSE buttons ( and ) at the same time in step 2. You could also use the [+] and [–] buttons to change the transpose setting to “00”. • The effect of a transpose operation depends on the pitch of each note and on the tone you are currently using. If a transpose operation causes a note to be outside of the allowable range for a tone, the same note in the nearest octave within the range will be substituted. Using Touch Response When touch response is turned on, the relative volume of sound output by the keyboard is varied in accordance with the amount of pressure applied, just like an acoustic piano. Touch response provides a choice of three settings, described below. OFF: This setting turns off touch response. Keyboard pressure does not have any affect on the output notes. 1:This setting provides touch response that is suited for normal play. 2:This setting increases touch response, so stronger keyboard pressure has a greater effect than the “1” setting. E-48 704A-E-050A CTK591_e_46-58.p65 48 03.10.7, 4:27 PM Keyboard Settings 1 Press the SETTING button until the TOUCH RESPONSE SELECT screen appears. To u c h 2 Use the [+] and [–] or [0] and [1] buttons to change the setting. Example: To select touch response 2. To u c h • Touch response is on when touch response indicator is on. Adjusting the Accompaniment Volume You can adjust the volume of the accompaniment parts as a value in the range of 000 (minimum) to 127. To adjust the accompaniment volume 1 Press the SETTING button twice to display the accompaniment volume adjustment screen. Ac o m p olV Current accompaniment volume setting 2 Use the number buttons or the [+]/[–] buttons to change the current volume setting value. Example: 110 Indicator appears • Touch response is off when touch response indicator is off. NOTE • Touch response not only affects the keyboard’s internal sound source, it also is output as MIDI data. • Song memory playback, accompaniment, and external MIDI note data does not affect the touch response setting. About...