Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
Each of the jacks may be used as an input or a through connection. Speakon® connectors are recognized as the standard for professional installations, assuring a secure, permanent connection that won't corrode, vibrate loose or be easily tampered with. The 1/4" jacks are convenient. However, the Speakon® jacks are recommended when using power amplifiers over 150 watts, for permanent installations, or for the first enclosure among a number of daisy chained enclosures. IMPORTANT SAFETY INSTRUCTIONS: 1.Read, follow and keep these instructions. Heed all warnings. 2.This speaker is capable of producing high sound pressure levels that may cause permanent hearing damage. User caution is advised and ear protection is recommended during use. 3.This speaker is designed for use on a sturdy, level surface. Whenever stacking speaker cabinets, do not stack more than two high. Only speaker cabinets which are equipped with caster cups on their top surfaces are to be used underneath a cabinet which is equipped with casters. 4.Speaker cables are a tripping hazard and must be routed out of traffic areas and away from any possible accidental contact. 5.Do not expose this speaker to rain or moisture. Do not place liquid filled containers on this speaker. Clean only with a damp cloth. 6.Repair or service of this speaker should be performed only by qualified personnel. SVT12HE 1x12 Bass Cabinet The SVT12HE Jackplate: 1: 1/4" Input / Output Jacks 2: Speakon® Input / Output Jacks 3: High Frequency Horn Level Control Speakon® to 1/4" Wiring Diagram: Suggested Hookup Diagrams: TO SPEAKON FROM SPEAKON TO SPEAKON AMPEG SVT12HE 1x12 Bass Cabinet TECHNICAL SPECIFICATIONS: TYPE 1x12” Bass Enclosure FREQ RESPONSE (+/-3dB) 50Hz - 18kHz USABLE LOW FREQ (-10dB) 40Hz POWER HANDLING 300W RMS, 600W Peak IMPEDANCE 8 ohms SENSITIVITY 95dB SPL 1w/1m MAXIMUM SPL 125dB CROSSOVER FREQUENCY 5kHz COMPONENTS One Custom Designed 12” low frequency driver; One 1” high frequency horn DIMENSIONS (H x W x D) 16.5” x 21” x 16” WEIGHT 46 lbs. Speakon® is a registered TM of Neutrik AG • • # ■ * ' . * ' ' \ CAUTION: THIS SPEAKER IS CAPABLE OF PRODUCING HIGH SOUND PRESSURE LEVELS. CONTINUED EXPOSURE TO HIGH SOUND PRESSURE LEVELS CAN CAUSE PERMANENT HEARING IMPAIRMENT OR LOSS. USER CAUTION IS ADVISED, AND EAR PROTECTION RECOMMENDED IF UNIT IS OPERATED AT HIGH VOLUME. Ampeg continually develops new products, as well as improves existing ones. For this reason, the specifications and information in this manual are subject to change without notice. Ampeg - The Power of Bass îvmv. n mpeg, com 47-492-01 • 06/16/05...