Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
The battery check indicator (BATT.) will light briefly when a plug is inserted or removed from the output jack. This is normal and does not indicate a malfunction. The built-in preamplifier is automatically turned on when a plug is inserted into the output jack. When not using the instrument, or when playing it without amplification, be sure to remove the plug from the output jack so that the preamplifier power is turned off. Also, even when the power is switched off, the system consumes a small amount of power for the tuner standby mode. If the instrument is not going to be used for an extended period of time, we recommend that the battery be removed in order to avoid power consumption or leakage. NOMENCLATURE/THE CONTROLS Battery HolderControl Section Output Jack (with power switch function) Sound Hole Cover (Accessory) Pickup q w e y t r –12 +12 HIGH BATT. TUNER SUB PICKUP MIX BASS SIDE TREBLE SIDE –12 +12 MID MASTER VOL. LOW 0 10 0 10 0 10 q MASTER VOL. Main Pickup Bass Side Sub Pickup Mix of Bass Side Sub Pickup Treble Side Sub Pickup Mix of Treble Side Sub Pickup q MASTER VOL. (Master Volume) Control Adjusts the overall output volume level. * Make sure that the VOL. is turned to “0” before connecting or disconnecting. w BATT. (Battery Check) Indicator This indicator will light when the battery needs to be replaced. Please replace the battery as soon as possible when the BATT. indicator lights. e 3 Band Equalizer LOW : Boosts or cuts the level of the low frequencies. MID : Boosts or cuts the level of the middle frequencies. HIGH : Boosts or cuts the level of the high frequencies. r SUB PICKUP MIX Control Mixing output of the main and sub pickups allows greater sound creating capabilities. TREBLE : Controls the volume of the treble side sub pickup. BASS : Controls the volume of the bass side sub pickup. t Tuner Switch Switches the tuner ON/OFF. y Tuner Display Displays tuner information. Pickup Contact Pickup (installed inside of the body) Pre-amplifier Controls MASTER VOL., 3 Band (HIGH, MID, LOW) EQ control, SUB PICKUP MIX control (TREBLE SIDE, BASS SIDE) Output jack Combination end pin/power switch Output impedance 1 k. Power supply 9V DC, S-006P (6F22) dry cell battery Battery life Approx. 60 hours (without tuner) Approx. 57 hours (with the preamp switched ON and the tuner used 1 minute every 1 hour) * When using a manganese battery. * Varies according to operating conditions. Tuner Tuning System: Chromatic type (12 semitones), A4=440Hz Auto OFF Function: Tuner automatically switches OFF after 1 minute. Input: Built in pickup Accuracy: +/– 3 cents Accessories • Hexagonal wrench for neck adjustment x1 • S-006P (6F22) dry cell battery x1 • Sound hole cover x1 BATTERY REPLACEMENT Be sure to replace the battery as soon as possible when the battery check indicator lights in order to avoid reduced sound quality. * Be sure to remove the battery if the instrument will not be used for an extended period of time in order to prevent possible damage due to battery leakage. q Press the catch on the battery holder in the direction indicated by the arrow in the illustration in order to unlock it. w Slide out the battery case. e Remove the old battery from the battery case, and insert the new battery making sure that the (+) and (–) terminals of the battery are positioned as shown in the illustration. Use only a DC9V, S-006P (6F22) or equivalent battery. r Slide the battery case back into the battery holder and press firmly so that the battery case locks into place. USING THE SOUND HOLE COVER Feedback often occurs when controls are boosted on the electric acoustic guitar to match the volume of other instruments when playing in a band. When the instrument is used under the conditions described above, the Sound Hole Cover should be inserted into the sound hole. With the Sound Hole Cover in place, feedback is effectively reduced. OPEN Catch DC9V S-006P (6F22) Battery caseqOPEN w, rewr USING THE TUNER The guitar is equipped with an A4=440Hz standard pitch tuner. The tuner’s circuitry is independent from the guitar’s output circuit so switching the tuner ON/OFF will have no affect on sound output. q Press the TUNER switch. While the tuner activates the and lamps light alternately. w Tune the guitar string until the note name of the desired pitch appears in the tuner’s display. The lamp indicates the pitch is low. The lamp indicates the pitch is high. The pitch indicator ( ) flashes slower as the string’s pitch nears the note shown in the display. e The string is in tune when the and lamps both light. r Holding the TUNER switch down turns the tuner OFF. * The tuner will automatically switch OFF approximately one minute after the TUNER switch is pressed (energy saving function). To continue tuning, press the TUNER switch again. * It may take a few seconds before the tuner can detect pitches after being switched ON. * The note name and displays may have difficulty keeping up with irregular pitch changes. Gradually change t...