Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Nomenclature Mouthpiece ¦Trumpet Mouthpiece Receiver Lead Pipe 1st Valve 2nd Valve 3rd Valve Finger Hook Bell 1st Valve Slide Hook 1st Valve Slide 2nd Valve Slide 3rd Valve Slide Ring 3rd Valve Slide Main Water Key Cap 3rd Valve Water Key Cap Valve 3rd Valve Slide Main Tuning Slide Casing Stopper Screw ¦ Cornet 1st Valve Mouthpiece Mouthpiece Receiver Lead Pipe 2nd Valve 3rd Valve Finger Hook Bell 1st Valve Slide Hook 1st Valve Slide 2nd Valve Slide 3rd Valve Slide Ring 3rd Valve Slide Cap 3rd Valve Water Key Main Tuning Slide Valve Casing Main Water Key Nomenclature Nomenclature Flugelhorn 1st Valve 2nd Valve Bell 3rd Valve Main Water Key 3rd Valve Slide Valve Casing 3rd Valve 1st Valve Water Key Water Key Mouthpiece Mouthpiece Receiver Finger Hook 1st Valve Slide 3rd Valve Slide Trigger 2nd Valve Slide Cap Cap ¦ Rotary Trumpet Bell 3rd Valve Slide Trigger 1st Valve 3rd Valve Slide 3rd Valve 2nd Valve Water Key Main 3rd Valve Water Key Main Tuning Slide Mouthpiece Mouthpiece Receiver Lead Pipe * Specifications and/or design may change for reasons of improvement without notice. Before You Play Handling the Instrument As the trumpet is made of thin metal, handle the instrument carefully. Do not apply any excessive force, or bump the instrument so as to dent or damage it. ¦ Applying Oil Apply oil to the pistons 1. Unscrew the valve cap and pull the piston straight out of the valve casing until about half of the valve piston is exposed. 2. Apply a few drops of valve oil on the piston. Piston Valve oil * Do not apply too much oil. 3. Slowly, return the piston into the valve casing. At this time, make sure the number stamped on the piston is facing the mouthpiece. After the valve cap is tightened firmly, move the piston up and down a few times to distribute the oil over the piston evenly. Number * If all pistons have been removed from the valve casings, make sure the number stamped on the piston matches the number stamped on the casing before returning the piston into the valve casing. * The pistons must be oiled for them to function properly and smoothly. Applying Oil To The Rotors (Rotary Trumpets Only) 1. Hold the lever down and remove the valve slide. * If the valve slide is removed without holding the lever down, air pressure in the pipe drops creating a suction that can cause poor rotor function or damage to the inside of the pipe. 2. Apply some rotor oil to the rotor and then move the lever a few times to distribute the oil evenly. Rotor oil * To keep oil from mixing with the slide grease or dirt inside of the pipe, hold the oil container’s spout so that is does not come into contact with the inner walls of the pipe. * Since the oil container’s spout is metallic, be careful not to let the spout come into direct contact with the rotor. 3. Hold the lever down and replace the valve slide. * If you replace the valve slide without holding the lever down, pressure built up inside the pipe can cause poor rotor function or damage to the inside of the p...
Otros modelos de este manual:Instrumentos Musicales - YCR-2310SII (2.32 mb)
Instrumentos Musicales - YCR-2330II (2.32 mb)
Instrumentos Musicales - YCR-2330SII (2.32 mb)
Instrumentos Musicales - YCR-2610SII (2.32 mb)