Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
11110000 F0H Exclusive status 01000011 43H YAMAHA ID 0000nnnn 0NH N:Device Number 01011001 59H Model ID 0sssssss SSH ByteCountMSB 0ttttttt TTH ByteCountLSB 0ggggggg GGH Address High 0mmmmmmm MMH Address Mid 0lllllll LLH Address Low 0vvvvvvv VVH Data : : 0kkkkkkk KKH Check-sum 11110111 F7H End of Exclusive Details are the same as for 2.2.1 XG Bulk Dump. However, refer to table 3-n for address, byte count, and block. 2.2.3.1 MU100 Internal Performance bulk dump This message sets the INTERNAL PERFORMANCE block (refer to tables <3 - 1>, <3 - 3>). 2.3 Parameter request This message requests transmission of a parameter value. The output is transmitted in the Parameter Change message format (refer to 2.1.3, 2.1.4, and 2.1.5). 2.3.1 XG parameter request This message requests transmission of XG parameter settings. Settings are transmitted in the format of an XG parameter change (refer to 2.1.3). 11110000 F0H Exclusive status 01000011 43H YAMAHA ID 0011nnnn 3NH N:device Number 01001100 4CH Model ID 0ggggggg GGH Address High 0mmmmmmm MMH Address Mid 0lllllll LLH Address Low 11110111 F7H End of Exclusive 2.3.2 MU100 native parameter request (1) This message requests transmission of a parameter value unique to the MU100. The output is transmitted in the format of a MU100 native parameter change (refer to 2.1.4). 11110000 F0H Exclusive status 01000011 43H YAMAHA ID 0011nnnn 3NH N:Device Number 01001001 49H Model ID 0ggggggg GGH Address High 0mmmmmmm MMH Address Mid 0lllllll LLH Address Low 11110111 F7H End of Exclusive 2.3.3 MU100 native parameter request (2) This message requests the transmission of a parameter value unique to the MU100. The output format is the same as for a MU100 native parameter change (refer to 2.1.5). 11110000 F0H Exclusive status 01000011 43H YAMAHA ID 0011nnnn 3NH N:Device Number 01011001 59H Model ID 0ggggggg GGH Address High 0mmmmmmm MMH Address Mid 0lllllll LLH Address Low 11110111 F7H End of Exclusive 38 MU100 MIDI MIDI data format MIDI data format Dump request This message requests transmission of a specific block of parameter values. The output is the same as the bulk dump format. 2.4.1 XG dump request This message requests transmission of all parameters of the specified block of XG parameters. The output is the same as the format of XG bulk dump (refer to 2.2.1). 11110000 F0H Exclusive status 01000011 43H YAMAHA ID 0010nnnn 2NH N:device Number 01001100 4CH Model ID 0ggggggg GGH Address High 0mmmmmmm MMH Address Mid 0lllllll LLH Address Low 11110111 F7H End of Exclusive Address is valid only when the beginning of the block has been specified. Reception/transmission of Dump Request cannot be turned off by MIDI switches other than Exclusive = off. 2.4.2 MU100 native dump request (1) This message requests transmission of all parameters of the specified block of MU100 native parameters. The output is in the same format as an MU100 native bulk dump (refer to 2.2.2). 11110000 F0H Exclusive status 01000011 43H YAMAHA ID 0010nnnn 2NH N:Device Number 01001001 49H Model ID 0ggggggg GGH Address High 0mmmmmmm MMH Address Mid 0lllllll LLH Address Low 11110111 F7H End of Exclusive Details are the same as for 2.4.1 XG Bulk Dump Request. 2.4.3 MU100 native dump request (2) This message requests transmission of all parameter values of the specified MU100 native parameter block. The output is in the format of MU100 Native Bulk Dump (refer to 2.2.3). 11110000 F0H Exclusive status 01000011 43H YAMAHA ID 0010nnnn 2NH N:Device Number 01011001 59H Model ID 0ggggggg GGH Address High 0mmmmmmm MMH Address Mid 0lllllll LLH Address Low 11110111 F7H End of Exclusive Details are the same as for 2.4.1 XG Bulk Dump Request. 3. Realtime messages 3.1 Active sensing This message is used to prevent problems which could occur if a MIDI cable were to be disconnected or broken during a performance. When this message is received, the MU100 will begin monitoring the state of the MIDI cable. a) Transmission not transmitted. b) Receive ReceptionOnce FE has been received, failure to receive any MIDI message for an interval longer than approximately 300 msec will cause processing to be performed as if ALL SOUND OFF, ALL NOTE OFF, and RESET ALL CONTROLLERS messages were received, and the unit will reset to a condition in which FE was never received. MU100 MIDI 39 MIDI data format MIDI data format Parameter Base Address Model ID = 4C [XG] Parameter Description Remarks Adress (H) (M) (L) XG SYSTEM 00 00 00 System 00 00 7D Drum setup Reset Receives parameter changes only 00 00 7E XG System On Receives parameter changes only 00 00 7F All Parameter Reset Receives parameter changes only INFORMATION 01 00 00 System Information Receives dump requeste only EFFECT 1 02 01 00 Effect 1 (Reverb, Chorus, Variation) 02 40 00 Multi EQ EFFECT 2 03 00 00 Insertion Effect 1 03 01 00 Insertion Effect 2 DISPLAY 06 00 00 Display Letter Receives parameter changes only 07 00 00 Display Bit Map Receives parameter changes only MULTI PART 08 00 00 Multi Part 1 :...