Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
c = 0 BANK SEL MSB ; v = 0 :XG NORMAL, 64 :SFX NORMAL, 126 :XG SFX KIT, 127 :XG DRUM c = 32 BANK SEL LSB ; v = 0 - 127 c = 1 MODULATION ; v = 0 - 127 *2 c = 5 PORTAMENTO TIME ; v = 0 - 127 *2 c = 6 DATA ENTRY MSB ; v = 0 - 127 *1 c = 38 DATA ENTRY LSB ; v = 0 - 127 *1 c = 7 MAIN VOLUME ; v = 0 - 127 c = 10 PANPOT ; v = 0 - 127 c = 11 EXPRESSION ; v = 0 - 127 c = 16 AC1 CONTROLLER ; v = 0 - 127 *2 c = 64 SUSTAIN SWITCH ; v = 0-63:OFF , 64-127:ON *2 c = 65 PORTAMENTO SWITCH ; v = 0-63:OFF , 64-127:ON *2 c = 66 SOSTENUTO ; v = 0-63:OFF , 64-127:ON *2 c = 67 SOFT PEDAL ; v = 0-63:OFF , 64-127:ON *2 c = 71 HARMONIC CONTENT ; v = 0:-64 -64:0 -127:+63 *2 c = 72 RELEASE TIME ; v = 0:-64 -64:0 -127:+63 *2 c = 73 ATTACK TIME ; v = 0:-64 -64:0 -127:+63 *2 c = 74 BRIGHTNESS ; v = 0:-64 -64:0 -127:+63 *2 c = 84 PORTAMENT CONTROL ; v = 0 - 127 *2 c = 91 EFFECT SEND LEVEL 1 ; v = 0 - 127 c = 93 EFFECT SEND LEVEL 3 ; v = 0 - 127 c = 94 EFFECT SEND LEVEL 4 ; v = 0 - 127(Only when Connection = 1 (System)) c = 96 DATA ENTRY INC ; v = 127 *1 c = 97 DATA ENTRY DEC ; v = 127 *1 *1 Used only to set the parameter specified by RPN *2 Not valid for rhythm voices. *3 When MSB is other than 0 or 127, this is 0. When MSB = 0, this is 0,1,3,5,8,12,14,16,17,18,19,20,24,25,27,28,32,33,34,35,36,37,38,39,40, 41,42,43,45,64,65,66,67,68,69,70,71,72,73,96,97,98,99,100,101 When MSB = 127, this is 0. MODULATION controls the depth of vibrato. PORTAMENTO TIME adjusts the speed of the pitch change if the Portamento Switch = ON. A setting of 0 produces the shortest portamento time, and 127 produces the longest portamento time. For consistency with the GMx Portamento Control Standard, this value is valid only for the Portamento Switch (Ctr#65). PANPOT produces change relative to the preset value of the voice, both for melody voices and for rhythm voices. 45 M I D I D a t a F o r m a t M I D I D a t a F o r m a t EFFECT SEND LEVEL 1 controls the Reverb send. EFFECT SEND LEVEL 3 controls the Chorus send. EFFECT SEND LEVEL 4 controls the Variation send. HARMONIC CONTENT adjusts the resonance specified by the Voice. This is a relative parameter, and specifies an increase or decrease centered at 64. Higher values will produce a more distinctive tone. For some voices, the effective range maybe less than the range of the setting. RELEASE TIME adjusts the envelope release time specified by the Voice. This is a relative parameter, and specifies an increase or decrease centered at 64. ATTACK TIME adjusts the envelope attack time specified by the Voice. This is a relative parameter, and specifies an increase or decrease centered at 64. BRIGHTNESS adjusts the cutoff frequency specified by the Voice. This is a relative parameter, and specifies an increase or decrease centered at 64. Decreasing the value will make the sound more mellow. For some voices, the effective range may be less than the range of the setting. The following Bank Select related operations will all occur when a Program Change is received. Bank Select MSB:60h-6Fh are not sounded on models which do not support GMx, but since on the QY100 these are for future expansion of melodic voices, they will be sounded for the present by MSB00h. If Bank Select MSB is other than 0,40H, 60H-6FH, 7EH, or 7FH, voice Off will be selected. If Bank Select MSB = 0,40H, 60H-60FH, 7EH or 7FH is selected, unsupported BANK SELECT LSB numbers will be ignored. (3-2) CHANNEL MODE MESSAGES STATUS 1011nnnn (BnH) n = 0 ~ 15 VOICE CHANNEL NUMBER CONTROL NUMBER 0ccccccc c = CONTROL NUMBER CONTROL VALUE 0vvvvvvv v = DATA VALUE (3-2-1) ALL SOUND OFF (CONTROL NUMBER = 78H , DATA VALUE = 0) Turns off the sound of all currently sounding notes on the corresponding channel. The status of channel messages such as Note On and Hold On is also turned off. (3-2-2) RESET ALL CONTROLLERS (CONTROL NUMBER = 79H , DATA VALUE = 0) Resets the values of the following controllers. PITCH BEND CHANGE 0 (center) AFTER TOUCH 0 (minimum) MODULATION 0 (off) AC1 CONTROLLER 0 (minimum) EXPRESSION 127 (maximum) SUSTAIN SWITCH 0 (off) PORTAMENTO SWITCH 1 (on) SOSTENUTO SWITCH 0 (off) SOFT PEDAL 0 (off) NRPN Un-set status. Internal data will not change. RPN Un-set status. Internal data will not change. PORTAMENT CONTROL reset The following data will not change. PROGRAM CHANGE, BANK SELECT MSB/LSB, VOLUME, PAN. HARMONIC CONTENT, RELEASE TIME, ATTACK TIME, BRIGHTNESS, DRY SEND LEVEL, EFFECT SEND LEVEL 1, EFFECT SEND LEVEL 3, EFFECT SEND LEVEL 4, PITCH BEND SENSITIVITY, FINE TUNING, COURSE TUNING (3-2-3) ALL NOTE OFF (CONTROL NUMBER = 7BH , DATA VALUE = 0) Turns off all notes of the corresponding channel which are on. However if Sustain or Sostenuto are on, the sound will continue until these are turned off. 46 M I D I D a t a F o r m a t M I D I D a t a F o r m a t Performs the same processing as when ALL NOTE OFF is received. Sets the VOICE RECEIVE CHANNEL to OMNI OFF and CHANNEL = 1. (3-2-5) OMNI MODE ON (CONTROL NUMBER = 7DH , DATA VALUE = 0) Performs the sa...