Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
t [Open] button ........... Click this to open the file selected from the List. y [Cancel] button......... Click this to cancel the operation. 10 w “Save” button Click this to save the existing Library file with your new settings. If you are working on a new file, this button will open the “Save As” dialog, where you can name and save your settings as a new Library file (*.DRK/*.PCK). w “Save” button Click this to save the existing Library file with your new settings. If you are working on a new file, this button will open the “Save As” dialog, where you can name and save your settings as a new Library file (*.DRK/*.PCK). You can store the list of edited voices as a Library file (extension: “.DRK” or “.PCK”). Specify the desired location, input the file name, then click [Save]. The file is saved and the dialog box automatically closes. NOTE Library file names can consist of up to 8 characters plus a 3-character extension. q w e r t y q“Save in:”.................. Click this and choose the folder in which to save the Library file. w List box ..................... Shows the contents of the folder you wish to save to. e“File name:”.............. Specify the name of the Library file to be saved here. r“Save as type:”......... Click this and choose the file type. t [Save] button ............ Click this to save the Library file with the name specified in the “File name:”. y [Cancel] button......... Click this to close this dialog without saving. 11 e Save As SMF e Save As SMF “Save As SMF” Dialog Voice data can be saved as an SMF format file. NOTE If you choose multiple voices in the Library window, only one voice (lowest Voice No.) is saved. q w e r t y q“Save in:”.................. Click this and choose the folder in which to save the file. w List box ..................... Shows the contents of the folder you wish to save to. e“File name:”.............. Specify the name of the file to be saved here. r“Save as type:”......... Click this and choose the file type. t [Save] button ............ Click this to save the file as SMF with the name specified in the “File name:”. y [Cancel] button......... Click this to close this dialog without saving. 12 r “Editor Setup” button r “Editor Setup” button 13 “Setup” Dialog This is where you set up the Plug-in Board Editor to allow the transmission of voice data to your plug-in board. Click the [OK] button to apply the settings and quit the dialog. Click the [Cancel] button to quit without applying the settings. For more information on the settings in this dialog, refer to the owner’s manual or documentation for the particular “mother” device or client application. If you are using a Modular Synthesis Plug-in System compatible synthesizer, make sure the settings match the ones fixed on the instrument itself. (See chart on page 4.) q“MIDI In Port:”........... This is unavailable for the Plug-in Board Editor. w“MIDI Out Port:”........ Click this and choose the MIDI Out port. You can use the Plug-in Board Editor to control and edit the device connected to this port. Select the port which has been assigned to your plug-in board within the client application. e“MIDI Ch:” ................. Click this and choose the MIDI Out channel. This is used when monitoring sounds using the on-screen keyboard in the Edit windows. r“Device No.:” ............ Click this and choose the MIDI device number of the “mother” device to which the PLG150-DR/PLG150-PC is installed. t“Dump Interval:” ...... Click this and choose the interval between successive MIDI dumps. If you set too short an interval, you may encounter errors when transmitting MIDI data. y“Part No:”.................. Click this and choose the Part used for the DR/PC voice. u“Board No”................ Click this and choose the plug-in board to which the Plug-in Board Editor will send data. If you have multiple plug-in boards in the “mother” device, each is automatically set to a different Board Number (in numerical order from 1). i Output when edited in library When this is checked, any edits that you make with the Plug-in Board Editor are instantly and automatically transmitted to your plug-in board. This ensures that you can audition edits as soon as you make them. NOTE q w e r t y u i NOTE NOTE t “Transmit” button t “Transmit” button “Transmit” Dialog Voice data can be transmitted in bulk to your plug-in board. Click the [Start] button to begin transmitting the data. The progress bar shows how much of the data has been transmitted. Finally, click the [Close] button to quit the dialog. q“Transmit Type”........ Shows the voice data to be transmitted. w Progress bar ............. Shows how much of the data has been transmitted. e [Start] button ............ Click this to transmit the data. r [Close] button........... Click this to close this dialog. The MIDI Device Number has to be set correctly in order to transmit bulk data. For further details, see page 13. q w e r NOTE y “Edit” button Click this to open the Edit window for the select...
Otros modelos de este manual:Instrumentos Musicales - PLG150-PC (318.09 kb)