Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
• Make the appropriate MIDI Parameter Change Table settings via DME Designer. Data transmission speed is slow when the DME64N/24N is also being used. • Select 100Base-TX for Link Mode on all devices. • If you assigned the DME64N/24 as the group master, re-assign the group master to be the DME Satellite. Component Refer to the DME Designer Owner’s Manual for more information on each component. DME8i-C/DME8o-C/DME4io-C Owner’s Manual References References t 1. MIDI functions on the DME8i-C, DME8o-C, and DME4io-C 1.1 Scene Change Scene recall occurs according to the “MIDI Program Change Table” assignments when appropriate MIDI Bank Select MSB/LSB and Program Change messages are received by the DME8i-C/ DME8o-C/DME4io-C. When a scene recall operation is carried out via DME Designer, corresponding MIDI Bank Select MSB/LSB and Program Change messages are also transmitted by the DME8i-C/DME8o-C/ DME4io-C as specified by the “MIDI Program Change Table” assignments. Transmission does not occur while configurations are being switched. 1.2 Parameter Control MIDI Control Change and Parameter Change messages transmitted to the DME8i-C/DME8o-C/DME4io-C can be used to control parameters according to the “MIDI Control Change Table” and “MIDI Parameter Change Table” assignments. When a parameter is edited via DME Designer, corresponding MIDI Control Change and Parameter Change messages are also transmitted by the DME8i-C/DME8o-C/DME4ioC as specified by the “MIDI Control Change Table” and “MIDI Parameter Change Table” assignments. “MIDI Program Change Table,” “MIDI Control Change Table,” and “MIDI Parameter Change Table” assignments can be made via DME Designer. Refer to the DME Designer Owner’s Manual for details. 2. MIDI Data Flow MIDI IN MIDI OUT MIDI Rx CH Bank Select MSB/LSB Program Change (Scene Recall) Bank Select MSB/LSB Program Change (Echo Back) Bank Select MSB/LSB Program Change MIDI THRU Control Change (Parameter Edit) Control Change (Echo Back) Control Change Parameter Change (Parameter Edit) Parameter Change Parameter Change (Echo Back) MIDI Tx CH SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8 SW9 SW1: Program Change Rx Switch [On/Off] SW2: Control Change Rx Switch [On/Off] SW3: Parameter Change Rx Switch [On/Off] SW4: Program Change Echo Back Switch [On/Off] SW5: Control Change Echo Back Switch [On/Off] SW6: Parameter Change Echo Back Switch [On/Off] SW7: Program Change Tx Switch [On/Off] SW8: Control Change Tx Switch [On/Off] SW9: Parameter Change MIDI Rx CH: MIDI Rx Channel (1-16) MIDI Tx CH: MIDI Tx Channel (1-16) 3. MIDI Setup Specifies basic MIDI operation. Use DME Designer to make the setting. 3.1 Host Select Selects the input/output ports to be used for MIDI communication. 3.2 MIDI Tx Channel Specifies the MIDI transmit channel (1 ~ 16). 3.3 MIDI Rx Channel Specifies the MIDI receive channel (1 ~ 16). 3.4 MIDI Tx Switch Program Change Tx Switch: turns Bank Select MSB, LSB, and Program Change transmission on or off. Control Change Tx Switch: turns Control Change transmission on or off. Parameter Change Tx Switch: turns Parameter Change transmission on or off. 3.5 MIDI Rx Switch Program Change Rx Switch: turns Bank Select MSB, LSB, and Program Change reception on or off. Control Change Rx Switch: turns Control Change reception on or off. Parameter Change Rx Switch: turns Parameter Change reception on or off. 3.6 MIDI Omni Switch Program Change Omni Switch: turns the Bank Select MSB, LSB, and Program Change omni mode on or off. Control Change Omni Switch: turns the Control Change omni mode on or off. 3.7 MIDI Echo Back Switch Program Change Echo Back Switch: turns Bank Select MSB, LSB, and Program Change echo back on or off. Control Change Echo Back Switch: turns Control Change echo back on or off. Parameter Change Echo Back Switch: turns Parameter Change echo back on or off. DME8i-C/DME8o-C/DME4io-C Owner’s Manual References Other Connecting Audio I/O Connection Connecting toa Computer Controls and Connectors Introduction the DME Foreword 35 Foreword Introduction to the DME Satellite Controls and Connectors Connecting toa Computer Audio I/O Connection Connecting to anExternal Device Other Functions References 36 Foreword Introduction to the DME Satellite Controls and Connectors Connecting toa Computer Audio I/O Connection Connecting to anExternal Device Other Functions References 36 4. MIDI Format Number Format Notation Numbers ending with “h” are in hexadecimal format, while numbers ending with “b” are binary format. Characters “A” through “F” in hexadecimal numbers represent decimal values 10 through 15. Other lower-case characters (usually “n” or “x”) can represent any number. MIDI Format Chart (Rx: receive, Tx: transmit} Command Rx/Tx Function Channel Control Change (Bnh) Rx/Tx Editing the parameters Message Program Change (Cnn) Rx/Tx Scene Recall System Real-time TIMING CLOCK (F8h) Rx MIDI Clock Receive Message ACTIVE SENSING (FEh) Rx MIDI Cable Check System Exclusive Message Parameter Change Rx/Tx Editing the para...
Otros modelos de este manual:Instrumentos Musicales - DME8i-C (5.81 mb)
Instrumentos Musicales - DME8o-C (5.81 mb)