Votos - 1, Puntuación media: 4
(
)
)
|
Resumen del manual
This will ensure the best possible sound quality. • Never use the SAM12x with any speakers other than the SAM1HF/SAM2LF modules. • Only use the approved module configurations shown below. Other configurations could result in poor performance. • Check all speakers for proper phase using a phase tester. Incorrect wiring could lead to poor performance. • NEVER mount the SAM1HF on its side; always stand it up vertically. Only the approved configurations shown below should be used. y lÿ Y tlHH 0JI| Configuration 1 Configuration 2 Configuration 3 speaker outputs To woofer To woofer To tweeter IE IE Conf. 1/2 ^ L_ Conf. 3 1. Configure the SAM1HF/SAM2LF speakers in one of the approved configurations and mount them securely. See the SAM1HF/SAM2LF owner's manual for detailed information. 2. Connect the positive and negative speaker-level outputs of the amplifier to the speaker terminal inputs marked IN+ and IN-. 3. Connect the TW+ and TW- outputs to the positive and negative terminals on the SAM1HF. 4. Connect the first set of W+ and W- outputs to the positive and negative terminals on the SAM2LF. 5. Connect the second set of W+ and W- outputs to a second SAM2LF only if you are using multiple SAM2LF modules. 6. Using the selector knob on the side of the SAM12x, select the configuration you are using. H A Harman International Company © 2007 Harman International Industries, Incorporated. All rights reserved. JBL and JBL Synthesis are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries....