Votos - 4, Puntuación media: 3.3
(
)
)
|
Resumen del manual
Copyright © 2006 BOSS CORPORATION All rights reserved. No part of this publication may be reproduced written permission of BOSS CORPORATION. Main Features....................................................................................................... 4 Panel Descriptions .............................................................................................. 5 Connections....................................................................................................... 10 Turning the Power 12 Creating Loop Phrases ........... 13 Using AUTO Mode to Automatically ........ 16 Recording After Setting the ................................ 18 Creating Loop Phrases by Recording .. 20 Playing/Overdubbing Along with , , .................... 23 Recording and Performing Along .................................... 25 Using the RC-2 for Practicing—Phrase ............................................. 26 Playing a Phrase Only Once (One-Shot ........................... 27 Operating the RC-2 with an External Footswitch ........................................... 28 Saving and Deleting Phrases ........................................................................... 31 About the Tempo and Time Signature............................................................. 34 Changing the Battery ........................................................................................ 38 Troubleshooting ................................................................................................ 39 Specifications .................................................................................................... 41 Main . The RC-2 is lengths—simply . Up to 11 different loop . Phrase playback tempo . Undo and Redo functions allow performance mistakes made during . Loop Quantize automatically adjusts create loop phrases that match the current . The AUX IN jack allows for easy recording players. . A built-in guide—with a variety of patterns suitable provides a rhythmic accompaniment to play along with . You can use footswitches (optional FS-5U or FS-6) to stop switch phrases. Panel 12 54 7 8 3 6 Panel 12 54 7 8 3 6 1. AC Adaptor Accepts connection PSA-series). By using concerned about how * Use only the specified AC adaptor * If there is a battery in the unit while used, the RC-2 will switch over to battery-should the line voltage be interrupted (i.power cord disconnection). 2. CHECK Indicator Use this indicator to check the battery. * If the indicator dims or fails to light, it means that the depleted and needs to be replaced. For instructions, refer “Changing the Battery” ; p. 38. 3. AUX IN Jack Connect a cable from here to the headphone jack of your CD player or other digital audio player. * The input to AUX IN is muted whenever a cable is connected to the INPUT jack. * With the factory settings, the RC-2 applies compensation to the AUX IN signal so that it sounds appropriate when played through a typical guitar amplifier. If you’re using the RC-2 with a full-range speaker system, you can defeat this compensation if desired ( “Defeating AUX IN Compensation” ; p. 22). Panel Descriptions Panel Descriptions Connect a guitar amp * The OUTPUT jack also Inserting a plug into the OUTPUT out the plug to switch the power of the battery, pull out the plug connected you’re not using the RC-2. * Do not connect headphones to the OUTPUT may damage the headphones. 5. INPUT Jack Connect your guitar, bass, or other instrument * The input to AUX IN is muted whenever a cable connected to the INPUT jack. 6. STOP/TEMPO Jack Connect an optional footswitch (FS-5U or FS-6) to this The footswitch can be used to stop performances, set tempos, and switch phrases ( p. 28). Using a special Roland PCS-31 connection cable (optional), you can connect two FS-5Us or an FS-6. 7. Pedal Switch • Pressing the pedal twice in quick succession stops the RC-2 during any of its operations (recording, playback, or overdubbing). Empty phrase tracks Recording > Playback > Overdubbing Tempo Input > Recording > Playback > Overdubbing (When MODE knob is set to “ ” ) Phrase tracks containing recorded phrases Playback > Overdubbing • Pressing the pedal twice playback, or overdubbing. With loop phrases: Press the pedal twice within With one-shot phrases: Press the pedal twice within 0.5 seconds. Technique for Stopping Operation Example: When you want to stop at the end of a measure with a 4/4 time signature Press the pedal one time at the beginning of the fourth beat, then press it once again at the beginning of the first beat of the next measure. First time Second time 41 32 1 2 Stop ... * With loop phrases, press the pedal twice within an interval of one second; with One Shot phrases, press the pedal within an interval of 0.5 seconds. Panel Descriptions Panel Descriptions Loosen this thumbscrew replacement. * For instructions on replacing “Changing the Battery” ; p. 38. 13119 1410 12 15 9. PHRASE LEVEL Knob This adjusts the volume level of the phrase being played b...
Otros modelos de este manual:Instrumentos Musicales - RC-2 (1.83 mb)
Instrumentos Musicales - RC-2 (1.83 mb)