Votos - 4, Puntuación media: 4.5
(
)
)
|
Resumen del manual
Its low-latency FireWire drivers support high-resolution sample rates of up to 96kHz at a bit depth of up to 24 bits, and its compact footprint makes it ideal for studio and live use. This Quick Start Guide is designed to give you a very basic overview of the NRV10, in order to get you set up and running quickly. Even if you’re an experienced computer user and recording enthusiast, we suggest you take the time to read the accompanying User Guide, found on the included CD-ROM. It will familiarize you with the unit’s more advanced features, and help you to get the most out of your NRV10. English 1 | Installing the NRV10 NOTE: Do NOT connect the NRV10 to your computer until you have run the installer program. Installation Instructions for Windows XP Make certain the NRV10 is not connected to your computer before beginning the installation. 1. We recommend you download the latest NRV10 drivers by going to the Support > Drivers page at This will ensure that you have the newest available drivers. Once you have downloaded the latest drivers, simply double-click on the file once it has finished downloading. 2 NVR10 | Quick Start Guide If you do not have internet access, you can install the drivers packaged with the NRV10 by inserting the included FireWire Series CD-ROM into your computer’s CD drive. Your computer will automatically display the interactive install screen . (If the screen does not appear, you can manually start it by clicking on Start > My Computer > FireWire Series CD-ROM.) Select your product from the menu and click “install.” 2. Follow the driver installer’s on-screen instructions. 3. At various points during the installation process, you may be notified that the driver being installed has not passed Windows Logo Testing. Click “Continue Anyway” to proceed with the installation. 4. Once the installer has completed, click “Finish.” 5. Shut down your computer. 6. Connect the NRV10 to a power outlet and to an available FireWire port on your computer. 7. Power on the NRV10, then start your computer. NVR10 | Quick Start Guide 3 8. Windows will identify the new interface and ask if you want to search the Internet for a driver. Select “No, not this time” and click “Next.” 9. Windows will display the Found New Hardware Wizard. 10. Select “Install software automatically” and click “Next.” 11. When the Wizard has completed, click “Finish.” 12. When the installation is complete, you will see a message stating “Your new hardware is installed and ready to use.” Your NRV10 will appear in Windows under Control Panel > Sounds and Audio Devices. The NRV10 Control Panel can be accessed by clicking on the red icon in the system tray. IMPORTANT: While it is possible to “hotplug” a FireWire device, it is strongly recommended that you connect or disconnect your NRV10 only when your computer is powered off. For more information on this issue, please visit the M-Audio knowledge base at English 4 NVR10 | Quick Start Guide Installation Instructions for Mac OS X Make certain the NRV10 is not connected to your computer before beginning the installation. 1. We recommend you download the latest NRV10 drivers by going to the Support > Drivers page at This will ensure that you have the newest available drivers. Once you have downloaded the latest drivers, the downloaded file should automatically mount and display its contents on the desktop. (If the file does not mount automatically, simply double-click on the file once it has finished downloading to view its contents, then double-click on the installer application). If you do not have internet access, you can install the drivers packaged with the NRV10 by inserting the included FireWire Series CD-ROM into your computer’s CD drive. Your computer will automatically display the CD-ROM icon on your desktop. Double-click on this icon to view the contents of the disk. Next, double-click “Open Me,” and select your product from the drop-down menu on the welcome screen and click “Install.” 2. Follow the driver installer’s onscreen instructions. 3. When the installer has completed, click “Close.” 4. Shut down the computer. 5. Connect the NRV10 to a power outlet and to an available FireWire port on your computer. 6. Power on the NRV10, then start your computer. Your NRV10 will appear in Mac OS X under System Preferences > Sound, in the Input and Output tabs. The NRV10 Control Panel will appear in System Preferences > Other. IMPORTANT: While it is possible to “hotplug” a FireWire device, it is strongly recommended that you connect or disconnect your NRV10 only when your computer is powered off. For more information on this issue, please visit the M-Audio knowledge base at NVR10 | Quick Start Guide 5 2 | Connecting the NRV10 Your NRV10 is equipped with five XLR mic inputs and eight 1/4” line inputs. Connect any combination of mic and line sources to these inputs, being sure to choose the appropriate input source on each chann...