Votos - 4, Puntuación media: 4.5
(
)
)
|
Resumen del manual
Please read the following Manual before installing or using your new unit. 5 1. CHDR Warning Label 2. Projection Aperture 3. Remote receiving sensor 4. Aperture Label 5. Non Interlocking Housing Label 6. Mini plug External Power supply 7. Emission Indicator Switch 8. Shutter Control Switch 9. Power Switch 10.Identification Label 11.Battery Cover (bottom) 12.Mode Select 13.Connection for interlink cable 14.External sensor connection 15.Certification Label 15 7 8 910111213 14 DANGER VISIBLE LASER RADIATION AVOID DIRECT EYE EXPOSURE LASER DIODE WAVELENGTH : 635-650 nm MAX. OUTPUT : < 5 mW CLASS llla LASER PRODUCT CHDR Warning Label This Laser product complies with the CDRH/BRH radiation performance standards. 21 CFR Subchapter J. Certification Label “DANGER - Laser radiation when open. AVOID DIRECT EYE EXPOSURE.” For Class llla accessible laser radiation with an irradiance greater than 2.5 x 10-3 Wcm -2 ■ AVOID EXPOSURE Laser light is emitted from this aperture Non Interlocking Housing Label Aperture Label 1 Caution! No user serviceable parts inside do not attempt repairs. In the event your unit should fail, contact your Ame/K&nZJ^dealer. This Laser product complies with the CDRH/BRH Radiation Performance Standards. 21 CFR Subchapter J. WARNING! This Product must not be used for audience scanning. To prevent fire or shock hazard, do not expose this product to a high temperature or high humidity area. Amer/can Dt ®los Angeles, ca. 90058 usa USER 4800 16 SPECIFICATIONS: Diode: 5 mW, Weight 3 lbs., Dimensions: 10.5” x 4.5” x 4.5” Supply Voltage:9VDC With supplied AC 120V adapter or AC 240V adapter must be 500ma min. or 4 C batteries(not supplied) Wireless remote uses 2AA batteries (Supplied) 17 18 16. 24 Geometric Pattern presets 17. Mode select 18. Static Dynamic 21 19. Adjust Dynamic 22 (pulsating image) 23 20. + ,- adjustments 20 21. Standby, 22. Emission indicator switch 23. Shutter control switch 19 Operating Instructions: 14. 3P Infrared Receiving Sensor socket 13. Series Control Left Input , Right Output 12. Function Mode (4) may be selected for Auto or Music Modes. NOTE: Must be selected before turning on unit but it can be defeated by remote control. Auto Mode: 24 pre-set geometric patterns to be executed in regular order. Music Mode: 24 pre-set geometric patterns to executed in regular order, speed is controlled by built-in microphone. Additional Safety Notes: This is a laser product, please avoid direct eye exposure. Take out all the batteries to avoid humidity damage. Do not expose this product to high temperature or high humidity area. Remote Control: The Laser-4800 Comes with a remote control which allows you to control the speed, type of design, music, manual or auto modes, and by pressing static and adjust dynamic buttons multiple times,or then pressing (+) (-) buttons and holding them down you can alter most of the existing geometric patterns. Master / Slave: The Laser-4800 can be used in a master /slave configuration using cable available from The only precautions are to observe the in and out configuration , and cable should not exceed 300’. Additional Safety Notes: This is a laser product, please avoid direct eye exposure. Take out all the batteries, when not in use, to avoid humidity damage. Do not expose this product to high temperature or humidity . Caution! No user serviceable parts inside do not attempt repairs. In the event your unit should fail, contact your Amrco/7ZJ/®dealer....