Iniciar sesión:
Votos - 3, Puntuación media: 3.7 ( )

Manual de usuario Boss Audio Systems, modelo ME-50B

Fabricar: Boss Audio Systems
Tamaño del archivo: 1.91 mb
Nombre del archivo: c662c442-03ad-8164-21da-92c5509d9611.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


* The COMPRESSOR/LIMITER indicator goes off when this is set to OFF. NATURAL Provides natural-sounding performances with little thinning of the sound, even when pushing the effect. This is especially effective with slapping and hard picking. LIMITER Prevents distortion by suppressing the input signal level when it exceeds the set value. 160D SOFT Models the dbx 160 set to a lower compression ratio. 160D HARD Models the dbx 160 set to a high compression ratio. D-COMP Models the MXR DynaComp. THRESHOLD/SUSTAIN knob Adjusts the depth of the effect. When the TYPE is set to NATURAL, LIMITER, 160D SOFT, or 160D HARD, this functions as the THRESHOLD knob, which sets the level at which the limiter starts to take effect. The more the knob is turned to the left (counterclockwise), the lower the level at which the limiter effect is enabled. When the TYPE is set to D-COMP, the knob functions as a SUSTAIN control, which adjusts how long sounds are sustained. Turn the knob to the right (clockwise) to get longer sustain times. LEVEL knob This adjusts the level when the compressor/limiter is on. Use this to balance the volume level so it is the same when the compressor/limiter is switched on and off. You can use a foot switch to switch the compressor/ limiter on and off. For more detailed information, refer to “Using the Foot Switch” (p. 26). Using the Effects FILTER/TONE FILTER / TONE indicator Pedal indicator FILTER / TONE pedal Included here are eleven different effects that alter the particular characteristics of the bass sound itself. You can select and use any one of these effects at a time. FILTER/TONE pedal The filter tone is alternately switched on and off each time you press the pedal. The indicator lights up when the effect is on. TYPE knob Selects the effect to be used from the eleven different effects that are available. T.WAH UP/T.WAH DOWN/T.WAH EDGE This effect alters the wah effect in response to the level at the time the bass is played. T.WAH UP: The filter shifts to higher frequencies in response to the input. T.WAH DOWN: The filter shifts to lower frequencies in response to the input. T.WAH EDGE: Gives a filter with a stronger effect. SENS/BOTTOM knob Adjusts the sensitivity when the filter is being altered. DEPTH/TONE knob Adjusts the reference frequency for the wah effect. RESONANCE/E.LEVEL knob Adjusts the amount of wah effect at frequencies near the reference frequency. Turning the knob to the left widens the range of frequencies in the vicinity of the reference frequency in which the wah effect is to be produced, while turning the knob to the right narrows this range. OCTAVE UP/OCTAVE DOWN This effect creates a fatter, thicker sound by adding to the input sound the same sound raised one octave (OCTAVE UP) or lower one octave (OCTAVE DOWN). * This effect does not function correctly if two or more notes are played simultaneously. SENS/BOTTOM knob Adjusts the volume of the direct sound. DEPTH/TONE knob Adjusts the tone of the octave sound. Turn the knob to the left for a milder sound or to the right for a sharper sound. RESONANCE/E.LEVEL knob Adjusts the volume of the octave sound. SLOW GEAR This produces a volume-swell effect (similar to how a violin is played. SENS/BOTTOM knob Adjusts the sensitivity of the slow gear effect. As the knob is turned more to the left, there is less response to weaker picking, so the effect is expressed only when strong picking is used. DEPTH/TONE knob This adjusts the time needed for the volume to reach its maximum from the moment you begin picking. RESONANCE/E.LEVEL knob Adjusts the volume of the effect sound. Using the Effects DEFRETTER This effect allows you to use a conventional bass to simulate a fretless bass. SENS/BOTTOM knob Adjusts the amount of defretter effect applied in response to the input sound. DEPTH/TONE knob Adjusts the tone. Turn the knob to the left for a milder sound, or to the right for a sharper sound. RESONANCE/E.LEVEL knob Adjusts the volume of the defretter sound. ENHANCER This is an effect that clarifies the contour of the input sound by emphasizing the sound following changes in the input level. SENS/BOTTOM knob This adjusts the Enhancer sensitivity. The more the knob is turned to the right, the more softly you can play and still have the effect applied. DEPTH/TONE knob Adjusts the frequency at which the enhancer will begin to be applied. The effect is applied at higher frequencies the more the knob is turned to the right. RESONANCE/E.LEVEL knob Adjusts the amount of enhanced sound added to the mix. BOTTOM BOOST/MID SHAPE/HOLLOW Alters the special characteristics of the bass sound. BOTTOM BOOST: Creates a tone with a boosted low end. MID SHAPE: Creates a tone with the midrange cut back. HOLLOW: Adds body resonance to create a tone resembling that of an acoustic-electric bass. SENS/BOTTOM knob Adjusts the tone of the lower range. DEPTH/TONE knob Adjusts the tone of the upper range. RESONANCE/E.LEVEL knob Adjusts the volume. Using the Effects DR...

Otros modelos de este manual:
Instrumentos Musicales - ME-50B (1.91 mb)
Instrumentos Musicales - ME-50B (1.91 mb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría