Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
Temp I* Cond. Temp II* Capacity ............. . 901 Btu/h ±7% 983 Btu/h ±7% E.E.R................. . 5.56 Btu/Wh ±7% 6.38 Btu/Wh ±7% Current .............. . 1.41 Amps 1.34 Amps Nominal Motor Data Motor Input ............. . .162 Watts 154 Watts Rated Current .......... . . 1.31 Amps Type .................. . . RSCR, PTC relay Locked Rotor ......... .11.9 Amps Start Current ......... . 19.3 Amps Coil Resistances Run . . . .3.37 Ohms @ 68°F (20°C) Start . . . 4.64 Ohms *Test Conditions for Performance Specifications Test Oil ................ISO VG 10 Shell Temp ..............150.0°F / 65.0°C Condensing Temp.........(I) 130.0°F / 54.4°C .........(II) 105.0°F / 40.6°C Evaporating Temp.........-10.0°F / -23.3°C Ambient Temp............90.0°F / 32.2°C Gas Superheat ...........90.0°F / 32.2°C Liquid Sub-Cooling ........90.0°F / 32.2°C Electrical Accessories'1' Overload Protector Nominal Operating Characteristics Model Name 4TM758NFBYY Manufacturer Texas Instruments Temperature To...........Open: 248°F ± 9°F / 120°C ± 5°C Close: 142°F ± 16°F / 61°C ± 9°C Trip Current.............. @158°F (70°C) 4.05 Amps ± 7.5% @77°F (25°C) 12.0 Amps @ 16 sec. max. P.T.C. Starting Device Nominal Operating Characteristics Model Name PTH7M6R8 Manufacturer Murata Mfg. Base resistance @ 77°F(25°C) ±20% 6.8 Power Consumption (max) 2.9 Operation time 0.6 to 1.8 Recovery time (max) 60 PTH490D-AS6R8 Murata Mfg. 6.8 Ohms 3.5 Watts 1.0 to 2.7 seconds 65 seconds Run Capacitor 15 |jF 180 V (min.) tAlthough these accessories are listed by UL/CSA for use with this compressor, Matsushita assumes no responsibility whatsoever for these or any other components sourced by the refrigeration system manufacturer from third parties. Refrigerant Control . . Capillary Tube Evaporator Temp. Range.......-31°F to 23°F / -35°C to -5°C Performance Curves o O. -40 -30 -20 -10 10 20 2,200 2,000 1,800 1,600 1,400 1,200 1,000 800 600 400 200 -40 -30 -20 -10 0 Evaporating Temperature (°F) I--110°F - - - - 120°F -130°F 10 9 - Point Data Evaporating Temp. •c r 20 Condensing Temp. Rating -30F -10F + 10F 130F Btu/h 410 910 1,618 Watts 104 162 229 Amps 0.91 1.41 1.99 E.E.R. 3.94 5.56 7.07 120F Btu/h 468 942 1,666 Watts 108 160 221 Amps 0.94 1.39 1.92 E.E.R. 4.33 5.89 7.54 110F Btu/h 498 976 1,690 Watts 109 157 210 Amps 0.95 1.37 1.83 E.E.R. 4.57 6.22 8.05 0 ■ X ® Panasonic Industrial Company Refrigeration Products Department ж Сл 1 |гп lUI НС Tel: 201 - 392 - 4249 Fax: 201 - 392 - 4315 Rev#1-5/9 MATSUSHITA Compressor Single Phase 115 V MODEL# DC73C12RCU6 R-134a 60 Hz ~ R.S.C.R. Dimensions* mm inches Tubes Tube O.D. Wall Material A..................... 211.8......... ..........8.34 Suction ........ . .0.393 in. / 10 mm 0.037 in. / 0.95 mm Copper B ..................... 84.2 .......... ..........3.31 Process ....... . . 0.33 in. / 8.3 mm 0.035 in. / 0.9 mm Copper C ..................... . 127.6......... ..........5.02 Discharge ...... . . 0.33 in. / 8.3 mm 0.035 in. / 0.9 mm Copper D ..................... 82.9 .......... ..........3.26 E ..................... 70.4 .......... ..........2.77 U.L. File # . . . . .....SA 4615 F ..................... 75.2 .......... ..........2.96 C.S.A. File #’s . .....LR - 36593 * All dimensions are for reference only This document sets forth certain operational parameters and conditions for operation of this product. If this product is operated outside of the parameters and conditions stated herein, buyer assumes sole and full responsibility and shall indemnify seller with respect to all product failures and all consequences thereof. Operation of the product outside of the parameters and conditions specified herein shall serve to invalidate all seller warranties, if any, with respect to the product. This document is for reference only. For specifications, please contact Panasonic's engineering department. General Data Oil Charge . . 250 cc ± 5 cc / 15.3 cu.in. ± 0.3 cu.in. Net Weight With Oil...........22.0 lbs, 10.0 kg Approved Oils: FREOL . . a 10, a 10E, a 15, a 15E, a 22, a 22E ICI .................RL10H, RL15H, RL22H HENKEL ..............ProEco 10S,15S, 22S Residual Moisture...............120 mg max. Impurities ...................... 10 mg max. Displacement ...........7.27 cc. / 0.444 cu. in. Panasonic’ Panasonic Industrial Company Refrigeration Produc...