Votos - 4, Puntuación media: 3.8
(
)
)
|
Resumen del manual
USER GUIDE S ™ Stereo Headphones S ™ Stereo Headphones Congratulations and thank you for choosing the Cardo S-2™ stereo headphones. Before using it we recommend that you familiarize yourself with the Bluetooth® functionality of your cellular phone and/or device. NOTE: Please visit for more information. 1 3 8 Cardo S- ™ Overview 1. Volume Down Button 2. Volume Up Button 3. Track Forward/Backw ww 4 ward Button 5 6 4. Play/Pause/Stop Button 5. Control Button7 (CTRL) 6. LED Status Indicator 7. Hold Button 8. Charging Jack S ™ Stereo Headphones S ™ Stereo Headphones GETTiNG STarTEd To use your Cardo S-2™ (“the headphones”), please follow these simple steps: • Charge your headphones. • Pair your headphones with a Bluetooth®-enabled mobile phone, stereo Bluetooth® music player, and/or stereo Bluetooth® adapter. WEariNG YOur CardO S- ™ HEadPHONES The headphones are labeled with an “R” and “L” on either side, indicating the right and left speakers. When wearing the headphones, all the buttons should be on your right ear. The headphones can also be easily folded for storage. 3 S ™ Stereo Headphones S ™ Stereo Headphones CHarGiNG YOur HEadPHONES The headphones come with a built-in rechargeable battery. Prior to using them, make sure to charge the headphones for at least 4 hours. Normally it takes approximately 3 hours to fully charge the headphones. Charging the Headphones Connect the charger to an AC wall outlet and the charger plug to the headphones’ Charging Jack. The LED Status indicator will be red while charging. NOTE: When charging begins, the headphones turn off automatically, and must be turned on again when charging is complete. Charger Charging Jack Charger Plug 4 S ™ Stereo Headphones S ™ Stereo Headphones Charging Time Charging the battery fully takes approximately 3 hours. When the battery is fully charged, the LED will turn blue and remain on. When charging is complete, disconnect the charger from the AC wall outlet and from the headphones. However, leaving them connected will not damage them. Talk Time, Music Play Time & Standby Time The fully charged battery offers up to 8 hours talk time, music play time and up to 250 hours standby time. When no calls are in progress, the headphones remain turned on in Standby mode. Low Battery When the headphones are on and the battery becomes low, the LED status indicator flashes red and the headphones emit a beep every minute. Please recharge the battery as described above. 5 S ™ Stereo Headphones S ™ Stereo Headphones TurNiNG YOur HEadPHONES ON aNd Off Turning On the Headphones Press and hold the CTRL Button for 4 seconds until you hear a short beep. The LED status indicator will then flash blue. If this is your first time using the headphones, please refer to the “Pairing Your Headphones” section below. NOTE: Tap the CTRL Button each time you turn on the headphones to reconnect the headphones to your mobile phone. Turning Off the Headphones Press and hold the CTRL Button for approximately 3 seconds until you hear a long beep. The LED status indicator will flash red once and then stop flashing. PairiNG YOur HEadPHONES The headphones only work with Bluetooth®-enabled mobile phones, stereo Bluetooth® music players, and/or stereo Bluetooth® adapters. Prior to using and pairing your headphones for the first time, you must pair them with a Bluetooth®-enabled mobile phone, stereo 6 S ™ Stereo Headphones S ™ Stereo Headphones Bluetooth® music player, and/or stereo Bluetooth® adapter. (The “Device”). NOTE: A Bluetooth® device which supports the A2DP profile is required to listen to stereo music wirelessly; in addition, a Bluetooth® device which also supports the AVRCP profile is required for some music playback features and functionality such as track forward/back. Please consult your device’s user guide for more information regarding its supported profiles. NOTE: Some stereo Bluetooth® adapters may not be compatible with the Cardo S-2™ headphones. For more details, please visit our website at: . NOTE: For maximum compatibility we recommend the Cardo BTA III stereo adapter. For more details please refer to III 7 S ™ Stereo Headphones S ™ Stereo Headphones Pairing Your Headphones to a Mobile Phone or Music Player 1. Turn on your device and activate its Bluetooth® function. Please refer to your device’s user guide for detailed instructions. 2. With the headphones turned OFF, press and hold the CTRL Button for approximately 8 seconds until the headphones LED status in- -dicator alternately flashes blue and red, indicating that the headpphones are in Pairing Mode. 3. Set the device to search for Bluetooth® devices by following the instructions in the device’s user guide. 4. The device will list the “Cardo S-2” as a discovered device. Select it from the list and press OK. 5. When prompted, enter the passkey “0000” (four zeros) and press “OK” to pair your headphones and the device. 6. When the pairing is ...