Votos - 5, Puntuación media: 3.6
(
)
)
|
Resumen del manual
Its rugged construction permits it to be used on the floor, where it can withstand accidental footsteps. It has a switchable low frequency roll- off filter to minimize footfalls on stage. The microphone works as well on a tabletop. Microphone sensitivity is 8.5 mV/Pa, and total harmonic distortion (THD) is 1% at an acoustical operating level of 133 dB. The equivalent noise floor is 22 dB-A. The microphone operates on phantom powering over the range of 9 to 52 volts dc. The finish is matte black, and the microphone can be painted any color to match decor. The connector is a 3-Pin XLR. Specifications Transducer Principle: Condenser prepolarized Frequency Range: 30–18,000 Hz Polar Pattern: Hypercardioid Sensitivity at 1,000 Hz: 8.5 mV/Pa (-42dBV) Equivalent Noise Level: < 22 dB-A Sound Pressure Level for 1% THD: 133 dB S/N Ratio (A-weighted): > 72 dB Electr. Impedance: < 400 ohms Load Impedance: > 1,000 ohms Features • Non-crush construction • Inconspicuous • Unidirectional pickup • Paintable Low frequency roll-off: switchable bass-cut 12 dB/octave, 200 Hz Power Requirement: 9–52 volts phantom powering Connector: 3-Pin XLR-type Cable Length: 10 ft. (3 m) Finish: Matte dark gray Size: 7.3 x 4.7 x 0.8 in. (185 x 120 x 20 mm) Net/Shipping Weight: 5.6 oz. (160 g)/14.8 oz. (420 g) Included Accessories: W 547 Windscreen Optional Accessories: B 18 Battery power supply Architects and Engineers Specifications The microphone shall be a boundary layer condenser type with a level of 133 dB. The equivalent noise floor of the microphone shall hypercardioid pattern. The size of the microphone shall fall within be no greater than 22 dB-A. The microphone shall operate on the rectangular envelope given by: 7.3 x 4.7 x 0.8 in. phantom powering over the range from 9 to 52 volts dc. The (185 x 120 x 20 mm). The microphone’s sensitivity shall be no microphone shall be rugged enough to withstand the weight of a lower than 8.5 mV/Pa, and the microphone shall produce no more normal person who steps on it. The microphone shall be the AKG than 1% total harmonic distortion (THD) at an acoustical operating Acoustics Model C 547 BL. Graphical Data 7.3 in. (185 mm) 4.7 in. (120 mm) 4.7 in. (120 mm) AKG is constantly improving and modifying therefore, specifications are subject to change Limited Warranty Valid only in the United States. AKG Acoustics warrants AKG products against defects in material or workmanship for a period of two years from the date of original purchase for use, and agrees to repair or, at our option, replace any defective unit without charge for either parts or labor. Important: This warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, the affixing of any attachment not provided with the product, loss of parts or connecting the product to any but the specified receptacles. This warranty is void unless ...