Votos - 4, Puntuación media: 4.8
(
)
)
|
Resumen del manual
Its hypercardioid polar pattern gives the C 419 additional isolation from floor monitors and other instruments. The microphone is small, light weight, and can be easily clipped to the bell of an instrument. The flexible gooseneck allows for precise capsule placement, while the rubber-tipped clamp ensures secure mounting and protects the instrument from damage. The C 419 features a 10 ft. (3 meter) cable terminated with an XLR-M connector. It accepts phantom voltages over the range of 9 to 52 volts. The C 419 L is terminated with a TA3-F, mini-XLR connector compatible with AKG wireless bodypack transmitters or the optional, B 29 L battery operated phantom power supply. Specifications Transducer type: Condenser pressure gradient Frequency response 20 Hz - 20 kHz Polar pattern: Hypercardioid Impedance: 200 ohms Output connector: XLR, mini XLR (C419/L) Sensitivity: 7 mV/Pa; -43 dB (re 1 V) Powering: Phantom powering from 9 to 52 Vdc Sound pressure level for 1% /3% THD: 126/130 dB Size: (7.1” x 1.4”) including clamp (180 mm x 35 mm) Net weight: 5.1 oz. (141 g) Shipping weight: 16.8 oz. (462 g) Standard accessory W 44 Windscreen Optional Accessories: B 29 L Battery operated phantom power supply with a 2 input mixer. (used with the C 419 L version) WMS 40, 80, 61, 81 wireless microphone system (used with the C 419/L) C 419 Wind Instrument Micromic Features • External shock mounting for excellent isolation • Rubberized clamp for simple and secure mounting • Miniature gooseneck extension for precise placement • Adaptable to phantom powering or wireless operation • Hypercardioid pattern for good isolation from other players and floor monitors Architects and Engineers Specifications The microphone shall be a condenser type with a hypercardioid the instrument. The microphone shall be adaptable to either pickup pattern with response from 20 Hz to 20 kHz. Sensitivity phantom powering over the range from 9 to 52 Vdc, or for direct shall be no less than 7 mV/Pa, and the maximum operating level use with a wireless transmitter worn by the user. The microphone for 1 and 3% THD shall be 126 and 130 dB, respectively. The dimensions shall be 7.1 x 1.4 inches, including the clamp, and the microphone shall be equipped with a rubberized clamp to facilitate net microphone weight shall be no greater than 5.1 ounces. The attaching to the bell of a wind instrument without leaving a mark on microphone shall be the AKG Acoustics Model C 419. AKG is constantly improving and modifying therefore, specifications are subject to change Graphical Data or consequential damages. However, the limitation of any right or remedy shall not be effective Limited Warranty where such is prohibited or restricted by law. Simply take or ship your AKG product prepaid to our Valid only in the United States. AKG Acoustics warrants AKG products against defects in material service department. Be sure to include your sales slip as proof of purchase date. (We will not repair or workmanship for a period o...