Votos - 0, Puntuación media: 0 ( )

Fabricar: Philips Tamaño del archivo: 749.27 kb Nombre del archivo: Idioma del manual:

1 Activate the Bluetooth feature of your mobile phone, search for the model number of the headset. 2 On mobile phones featuring Bluetooth 2.1+EDR or higher, you do not need to enter a pass code. 3 From the found devices, select Philips SHB9100. • Enter "0000" (4 zeros) if prompted to enter the pin code of the headset. SettingsSelectBackConnectivity10:37Enter Password**** 0000SettingsBluetoothSelectBackConnectivity10:35AddBluetoothdeviceSettingsDevices FoundSelectBack10:36Philips SHB6000SettingsSelectBackConnectivity10:37Enter Password**** 0000SettingsBluetoothSelectBackConnectivity10:35AddBluetoothdeviceSettingsDevices FoundSelectBack10:36Philips SHB9100 EN 4 Use the headset Connect the headset to a mobile phone 1 Turn on your mobile phone. 2 Press and hold to turn the headset on. »»The blue LED flashes. »»The headset is reconnected to the last connected device automatically. If the last one is not available, the headset tries to reconnect to the second last connected device. Tip ••If you turn on the mobile phone or its Bluetooth feature after turning on the headset, connect the headset from the Bluetooth menu on your mobile phone. Automatic power saving If the headset fails to connect any Bluetooth device within range in five minutes, it powers down automatically to save the battery life. Use your headset Task Operation Sound or LED Indicator Turn the headset on. Press and hold for more than 4 seconds 1 short beep - 3 white flashes: Battery low < 25% - 2 white flashes: Battery level < 50% - 1 blue flash: Battery level > 50% Turn the headset off. Press and hold for more than 4 seconds - 1 long beep - 1 long white flash Play or pause music. Press 1 short beep Pick up or terminate a call. Press 1 short beep Reject a call. Press and hold 1 short beep Redial the last number. Press twice 1 short beep Switch caller in a call. Press twice 1 long beep Transfer a call to your mobile phone. (This function is available if your mobile phone supports this feature.) Press and hold for more than 4 seconds 1 long beep EN Adjust volume. Slide up/ down VOL +/- 1 short beep Skip forward. Press 1 short beep Skip backward. Press twice 1 short beep Mute/ unmute the microphone in a call. Press 1 short beep / 2 short beeps Activate voice dialing Press twice 2 short beeps before dial tone Note ••Available if supported by your mobile phone. Other status and indicators Headset Status Indicator The headset is connected to a Bluetooth device, while the headset is in standby mode or while you are listening to music. Blue LED flashes every 8 seconds. The headset is ready for pairing. LED flashes white and blue alternately. The headset is on but not connected to a Bluetooth device. Blue LED flashes fast. There is an incoming call. Blue LED flashes twice per second. Low battery. White LED flashes. Battery is fully charged. White LED is off. The LED is off. The headset is off./Charging is finished. The headset beeps every 5 seconds. The microphone is muted. Wear your headset Adjust the headband for the best fit. Tip ••After use, twist both earshells, fold the headset flat for storage. Use with the audio cable With the supplied audio cable, you can use the headset with non-Bluetooth enabled devices or use the headset on airplane. No battery power is required when you use the headset with the audio cable. Caution ••Finish your call before connecting the audio cable, as this will switch off battery power and end an incoming call. Connect the supplied audio cable to • the headset and; • an external audio device. EN EN 5 Technical data • Up to 9 hours of play time or talk time • Up to 200 hours of standby time • Normal time for a full charge: 3 hours • Rechargeable Lithium-Polymer battery (230 mAh) • 3.5 mm audio socket for corded headset mode • Bluetooth 2.1+EDR, Bluetooth mono support (Headset Profile - HSP, Hands- Free Profile - HFP), Bluetooth stereo supported (Advanced Audio Distribution Profile - A2DP; Audio Video Remote Control Profile - AVRCP) • Operating range: Up to 15 meters (50 feet) • Adjustable, flat-folding headband • Noise isolating slow recovery foam • Digital echo & noise reduction • Auto power off • Battery status check Specifications are subject to change without notice. EN 6 Frequently asked questions Bluetooth headset does not switch on. Battery is low. • Charge the headset. The audio cable is connected to the headset. • Disconnect the audio cable. Fail to pair with a mobile phone. Bluetooth disabled. • Enable the Bluetooth feature on your mobile phone and turn on the mobile phone before you turn on the headset. Pairing does not work. The headset is not in pairing mode. • Follow the steps described in this user manual. • Make sure that the LED light flashes whiteand blue alternately before you release . Do not stop holding the button after seeing the blue LED only. The mobile phone cannot find the headset. The headset may be connected to another previously paired device. • Turn the connected device off or move it out of ran...

Descargar ahora

Introduzca dos números de la imagen: