Votos - 3, Puntuación media: 3.7 ( )

Fabricar: Panasonic Tamaño del archivo: 3.1 mb Nombre del archivo: CF37MBA2CEM.PDF Idioma del manual:

If this is the case, we recommend that the display be magnified. © When the taskbar is hidden at the bottom portion of Acrobat® Reader, set the maximum display window’ size. © If a printer is connected, we recommend printing pages. The illustrations and display samples may not print w-ith a high quality. Starting Up/Shutting Down Starting Up Latch 1 Open the display (7) Slide the latch as shown. (2) Lift open the display. 2 Turn your computer on Slide the power switch as show-n and hold it for approximately one second until the power indicator turns on before releasing it. VA.W' f (©agami) Power S Indicator Power Switch : • The computer will not power on wrhen the display is closed (except when connecting an external display or w'hen [Panel Switch] has been set to [LCD Oft] in the Setup Utility Q* ’jvE^6 "Setup Utility"). ; • After confirming that the power indicator has turned on, avoid the following until Windows has completed loading. • Touching the power switch. ; • Performing any keyboard, touch pad, touchscreen (or external mouse) operations. ' • Closing the display. i If the display is closed while Windows is starting up. it is possible that color, etc., will not be displayed properly. Run the [MS-DOS Prompt] ([Start] - [Programs] - [MS-DOS Prompt]), and use full screen display mode by pressing C Alt) + C Enter) . After returning from the full screen mode ( Alt)+( Enter) again, the display will be show'n correctly. • Once the computer is powered oiT, you must wait at least ten seconds before powering it on again. • When the CPU temperature rises, the computer may not power on to prevent the CPU from overheating. Should this happen, allow the computer to cool down then switch the power on again. ^ If the computer still does not power on, please contact Panasonic Technical Support. # Select a device to start up the Operating System You can select the device for starting up the Operating System when starting up the computer. It is not necessary to change the settings of the [Boot] menu in the Setup Utility. 1 Turn the computer on and press i Esc ] when [Press to enter Boot First Menu] is displayed. 2 Select the device from the menu, press (Enter). "N When the Operating System is unable to start up from the selected device, it will start up from the device last used for start up. If no start up device is selected, the Operating System will start up in the order of the settings of the [Boot] menu in the Setup Utility during subsequent start ups. When you w'ant to change the settings in the Setup Utility, select from the menu. If security indicator (¡HI) is displayed, you must first enter your password. (O’ "Security Measures”) Upon entering your password and pressing C Enter j. t^e correct password is input, <5^j mnD h \] Will Start Over three incorrect attempts, or no password is entered for about a minute, -► * If after three attempts the correct password is not input, or if no password is entered for about a minute, the computer returns to the condition just before the attempt was made to start up the computer. Will Not Start* ^(Poweroffj 1 Starting Up/Shutting Down # When an application or file that was previously displayed appears on your screen, ihe standby or hibernation function has been set. (Q* "Standby/Hibernation Functions") 3 Select your application You are able to start working on your computer. Xnote> • The power saving function is factory set, so if there is no input from a key, the touch pad, the touchscreen or an external mouse (when one is connected) for a certain interval of time, the power to the LCD and hard disk may be turned off. The LCD will resume operation when the touch pad or an external mouse (when one is connected) is used, or when a key or the touchscreen is pressed. The power to the LCD may be turned off while Windows is setting up or even when an application software is being installed. In this case, because it is conceivable that a selection dialog box will be shown, do not press ( Space) or (Enter J to attempt to resume from this condition as doing so may trigger a selection, but instead, press a key unrelated to the direct triggering of a selection, like C Ctrl). In addition, when the computer is left alone, it automatically enters the standby mode (Q= "Standby/Hibernation Functions"). The computer will re- sume by sliding the power switch. • [System Devices] in [Start] - [Settings] - [Control Panel] - [System] - [Device Manager] may contain a device or devices bearing an exclamation mark or question mark. This does not indicate a malfunction. Such a mark (exclamation or question mark) will not be displayed if the operating environment of the device showing the mark is corrected, by for instance installing the driver of the device. Shutting Down (power off your computer) This procedure is shutting down without using the standby or hibernation function. (C? ’wunu'Sf6 "Standby/Hibernation Fu...

Descargar ahora

Introduzca dos números de la imagen: