Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
If [Disabled] is selected, all sound related settings are disabled. [Sound Port: Sound Blaster compatible I/O] Set the I/O address for the Sound Blaster compatibility mode. [Sound Port: WSS CODEC I/O] Set the I/O address for WSS CODEC. [Sound Port: IRQ] Set the IRQ for the sound chip. It is not possible to select the same IRQ as that selected for the parallel port. [Sound Port: DMA-A] [Sound Port: DMA-B] Set the DMA for the sound chip. Make sure that the settings for DMA-A and DMA-B do not overlap, and that neither of them overlaps with the DMA setting for the parallel port or the infrared port. Set the parallel port IRQ and I/O address. If the setting conflicts with the sound port IRQ setting, the sound port is automatically set to a different IRQ. Set the operation mode of the parallel port. The [EPP] and [ECP] mode settings can not be selected if the parallel port setting is [3BC]. If [Parallel Port: Mode] is set to [ECP], set the DMA channel. Make sure that the setting does not conflict with the DMA setting for (Sound Port: DMA-A], [Sound Port: DMA-B], or DMA of infrared port (only when [Serial Port B: Device] is set to [Infrared]). Set the external serial port (A) IRQ and I/O address. If the setting conflicts with IRQ and I/O address set for the serial port B (Touchscreen/Infrared), the serial port B is automatically set to a different IRQ and I/O address. Set the serial port (B) IRQ and I/O address. If the setting conflicts with IRQ and I/O address set for the serial port A, the serial port A is automatically set to a different IRQ and I/O address. [Serial Port B: Device] Select [Touchscreen] or [Infrared] for the device that use on serial port B. [Serial Port B: ASK Mode] This parameter can be selected only if the [Serial Port B: Device] is set to [Infrared]. Select [Enabled] for the ASK mode. Select [Disabled] for the IrDA or FIR mode. [Serial Port B: DMA] This parameter can be selected only if the [Serial Port B: Device] setting is set to [Infrared]. Set the DMA for the infrared port. If the setting conflicts with the DMA for the sound port, the sound port is automatically set to a different DMA. Set the drive to be used to boot the computer. Select [Enable] if you want to prevent someone from setting the user password without your knowing it. Select whether or not to use PCI clock control. Note that if [Enable] is selected, some CardBus cards may not be detected properly. Key Combinations • Do not press the following key combinations repeatedly in (quick) succession. • Do not press the following key combinations while using the trackball (mouse) or other keys. • Some keys cannot be used during system startup, or while executing the suspend or hibernation process. • Communication errors may occur if keys are used during processes such as high speed serial communications. Do not use the keys during communications. • Pressing a key during audio playback or recording may cause the audio to be disrupted. • Settings changed using ÎFnl + [F2], ÎFnl + [F3j and ÎFnl + [F6j only remain in effect temporarily. The settings defined using the Setup Utility are restored the next time the computer is restarted. 86 LCD brightness control 0+0 Hold down the [Fn] key and press IF2] to change the brightness. Each press advances the setting one step through the following sequence: Dark-Medium-Bright-Power Saving. When the brightness is at its maximum value, the following icon is displayed. Display change (Fn) + (F3) By pressing this key combination, you can select either an external display, LCD or simultaneous. Volume control [Fn] + (F4) (down), (fs) (up) Pressing this key combination adjusts the volume of the internal speaker. The following icon is displayed. 1^ l i Minimum Maximum Power Management switch 0+0 By pressing this key combination, you can change the power management feature of the Setup Utility. The following icon is displayed. 1 1 7T 17T Power User Standard Saving Setting Power off using the hibernation function Fnl + ÎF7 Pressing this combination causes the current screen on the display to be saved to hard disk drive, and powers off the computer. When the computer is powered on again, this same screen will be displayed. Speaker on/off switch FnUfF8] Pressing this key combination turns off audio from the internal speaker. Pressing it again turns audio back on. Also, the speaker automatically turns on when [Fn] + [F4| or [Fnl + [F5] is pressed. The following icon is displayed. On Off Remaining capacity of the battery pack Fn + F9 Pressing this key combination displays the remaining battery capacity on the screen. The following icon is displayed. CM 75k Remaining capacity display Battery pack is not installed. ECO mode for conserving power Fnl + IF10 Pressing this key combination cuts off power to the motor of the hard disk drive and the display until operation is resumed by pressing any key. 87 LED Indicators (A) Caps Lock This indicato...