Votos - 4, Puntuación media: 3.8
(
)
)
|
Resumen del manual
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Responsible Party: Panasonic Corporation of North America One Panasonic Way Secaucus, NJ 07094 Tel No:1-800-LAPTOP5 (1-800-527-8675) For Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. Compliance Notice - CE Mark This equipment is in conformance with the requirements of the European Council Directive listed below: 73/23/EEC Low Voltage Directive with amendment 93/68/EEC 89/336/EEC EMC Directive with amendments 92/31/EEC and 93/68/EEC Ubereinstimmungserklarung - CE-Marke Diese Ausrustung erfullt die Anforderungen der unten angegebenen EC-Direktive: 73/23/EEC Niederspannungsdirektive mit Abanderung 93/68/EEC 89/336/EEC EMC-Direktive mit Abanderungen 92/31/EEC und 93/68/EEC Avis de conformite - Marque CE Cet equipement est conforme aux conditions des Directives de la Commission europeenne mentionnees ci-dessous: 73/23/EEC Directive sur la basse tension y compris la modification 93/68/EEC 89/336/EEC Directive CEM y compris les modifications 92/31/EEC et 93/68/EEC Interface Cable Use of an interface cable longer than 3 m (9.84 feet) is not recommended. Schnittstellenkabel Verwendete Schnittstellenkabel sollten eine Lange von 3 Metern moglichst nicht uberschreiten. Cable d’interface Nous vous deconseillons d’utiliser un cable d’interfaced’une longueur superieure a 3 m. ENGLISH DC-IN JackLAN Port External Display Port USB Ports 2a / 2b / 2c Allowable current for each port : 100 mA Names of Parts ENGLISH DC-IN JackLAN Port External Display Port USB Ports 2a / 2b / 2c Allowable current for each port : 100 mA Names of Parts USB Port 1 Connect the bus-powered USB devices (for example, CD/DVD drive) to the USB port 1. Specifications Item Description Power Supply Input DC15.6 V[Do not use other than the specified AC adaptor (Model No. CF-AA1683A).] Connector 65-pin USB Port x 4 (USB 2.0, Port 1 : Bus-Power) LAN Port IEEE 802.3 10 Base-T, IEEE 802.3u 100 Base-TX (RJ-45) IEEE 802.3ab 1000 Base-T External Display Port Mini Dsub 15-pin female Physical Dimensions(Width . Height . Depth) 150 mm . 22 mm . 52 mm {6.0" . 0.9" . 2.0"} Weight Approx. 225 g {0.5 lb.} Operating EnvironmentTemperature / Humidity 5 °C to 35 °C {41 °F to 95 °F} / 30 % to 80 % RH (no condensation) ENGLISH Connecting ENGLISH Connecting Expansion bus 1 Turn the computer off. Do not use the standby or hibernation function. 2 Connect the mini port replicator to the connector of the computer. connector Disconnecting 1 Turn the computer off. Do not use the standby or hibernation function. 2 While pushing the connector’s lock button, pull the connector out straight. If the mini port replicator is connected to the computer, connect the LAN cable, the external display cable, or the AC adaptor to the ports or jack on the mini port replicator. You cannot use the LAN port, the external display port, or the DC-IN jack on the computer. When connecting a USB 2.0 printer · Connect the printer to any of the USB 2a/2b/2c ports or the USB port of the computer. If you connect to USB port 1 and then disconnect the printer, the USB 2a/2b/2c ports may be disabled. In this case, restart the computer. When devices connected to USB ports (2a, 2b, 2c) will not operate: · Confirm that the consumption current for the connected device is 100 mA or less. If the current exceeds 100 mA, connect the device to USB port 1 or to a USB port on the computer. For more information about the settings and preparations of the peripheral devices, refer to the peripheral devices’ own operating instructions. NOTE ENGLISH ENGLISH Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. Please dispose of this item only in designated national waste electronic collection schemes, and not in the ordinary dust bin. For business users in the European Union If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. Bezeichnungen der Teile DEUTSCH Bezeichnungen der Teile DEUTSCH Anschluss fur externes Display LAN-Anschluss USB-Steckbuchsen 2a / 2b / 2c Zulassiger Strom fur jeden Port : 100 mA USB-Steckbuchsen 1 Schlie.en Sie Bus-getriebene USB-Gerate (beispielsweise ein CD/DVD-Laufwerk) an den USB-Steckbuchsen 1 an. Netzteibuchse Te...