Votos - 2, Puntuación media: 5
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
2 Insert the disc into the optical disc drive or connect the USB flash drive to the USB port on the computer while the computer is in Normal mode. If your computer is equipped with the USB port that is compliant with the USB 2.0 standard, connect a USB device to the port. 3 Turn off the computer and turn it on once again. 4 If you are using the external optical disc drive or USB flash drive, press the F11 key repeatedly until the VAIO logo disappears. The Windows Boot Manager screen is displayed. 5 Press the .or . key to select Start VAIO Care Rescue and press the Enter key. If the language selection window appears, select your desired language and click OK. 6 Select Start recovery wizard. To perform the custom recovery, select Tools and click Start advanced recovery wizard. 7 Follow the on-screen instructions. If you want to use the hard disk drive encryption features, disable Rapid Wake by performing the custom recovery to avoid leaving unencrypted data on your computer. (Z Series and T Series only) See the back side. Printed in China © 2012 Sony Corporation Backing up and restoring your data Troubleshooting To back up and restore your data when you can start Windows If you can start Windows, back up and restore your data with the Windows feature. To use the features, click Start, Control Panel, System and Security, and Backup and Restore. To back up and restore your data when you cannot start Windows When you cannot start Windows, back up your data with VAIO Care Rescue. To restore files which have been backed up by VAIO Care Rescue, use VAIO Data Restore Tool. If your computer is equipped with the USB port that is compliant with the USB 2.0 standard when you use a USB device to back up your data, connect the USB device to the port. Restoring your data using a restore point A restore point enables you to restore your computer system files to the previous state when the restore point was created. Typically, a restore point is created automatically, for example when you install a software driver. However, we recommend that you create the restore point manually on the Control Panel window before installing any software or software drivers on your computer. To restore system files using the restore point when you cannot start Windows 1 Follow steps 1 to 4 in "To recover from Recovery Media" of Recovering your computer on the front side. 2 Press the .or . key to select Repair Windows 7 and press the Enter key. 3 Select a keyboard layout and click Next. If the appropriate keyboard layout is not selected, you may not be able to enter the password correctly. 4 Select your operating system and click Next. Back up your files with Rescue Data if you have changed the files after you backed up them using the Windows backup feature. 5 Click System Restore. The System Restore window appears. 6 In the Recovery window, click Open System Restore. 7 If the Choose a different restore point option is displayed in the System Restore window, select it and click Next...
Otros modelos de este manual:Notebooks - SVE1111M1EP (385.99 kb)
Notebooks - SVE1111M1EW (385.99 kb)
Notebooks - SVE1111M1RB (385.99 kb)
Notebooks - SVE1111M1RP (385.99 kb)