Votos - 4, Puntuación media: 4.3
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
. Make sure the label of the disc is facing up. . If the disc requires software, make sure the software is installed according to the instructions of the program. . Check the volume of your speakers. . Clean the disc with an appropriate cleaner. . Make sure your computer is running on AC power supply only and try the disc again. . There may be condensation in the drive. Remove the disc and leave the drive open for approximately one hour. Remove the battery while you wait condensation to disappear. . Make sure that the power profile you are using is not Ultimate Battery Life. Please use AC Power (when using AC power) or Maximum Life (when running on batteries). Hardware Guide Using your VAIO computer 32 I cannot play a DVD . If a region code warning appears when you are using the DVD player, it could be that the DVD you are nNtrying to play is incompatible with the DVD drive on your computer. The region code is listed on the packaging of the disc. . Change the resolution under Control Panel - Display to a lower resolution. . If you see video but cannot hear sound, check all of the following: . Make sure the mute setting is off on your DVD player. . Check the Master Volume settings of the Sounds and Audio Device Properties. . If you have connected speakers externally, check the volume settings of your computer speakers and check the connections between your speakers and the computer. . In the Device Manager, check that the correct drivers are installed properly. To display the Device Manager, click Start, then Control Panel. Double- click the System icon. On the Hardware tab, click the Device Manager button. . A dirty or damaged disc may cause the computer to 'hang' while it tries to read the disc. If necessary, reboot the computer, remove the disc and then check that it is not dirty or damaged. . Check your PG settings (Parental Guidance) in the DVD software as they might be preventing you from playing certain DVDs when they are activated. . On your computer, the default DVD region code is 2. Do not change this setting using the Region Code Change function in Windows, or using any other software applications. System malfunctions originating from the user changing the DVD region code are beyond the scope of your warranty and will result in service charges for repair. If you do not immediately see the Display icon after clicking Control Panel, click Switch to Classic View on the left. Hardware Guide Using your VAIO computer 33 I cannot play a DVD when using two screens . When you use two screens at the same time (LCD and TV / LCD and CRT), the following errors will occur: nN . You will see a Hardware Overlay error message if you attempt to launch Click to DVD. . You cannot play a DVD with Windows Media Player version 9* . . You cannot play a DVD with Real One Player. This is because your computer uses the "video overlay" when two screens are in use. The software applications above do not support this feature, which is why the problems occur*. . You will not have a problem in the following situations: . When you use a CRT or an LCD display on its own. . When you play MPEG files which are recorded on the hard drive with Windows Media Player 9 or RealOne Player*. * Depending on your model. Read the Specifications document for more information. The reading speed of CD/DVD- RWs is very slow Generally, the reading speed of a CD/DVD-RW is slower than that of a -ROM or -R. The reading speed can also vary depending on the type of format. The disc tray does not eject even when the eject button is pressed . Check that the computer is turned on. . The CD- writing application software may be stopping the disk from being ejected. . Make sure the computer is not in Standby or Hibernate mode. . Make sure that the power profile you are using is not Ultimate Battery Life. Please use AC Power (when using AC power) or Maximum Life (when running on batteries). Using your VAIO computer 34 The disc tray ejects even when it has been locked into place . Ensure that the disc is placed with the label side facing up. . Clean the disc and the disc drive lens with an appropriate cleaner. nN . The disc may be scratched. Place another disc to see if that is the reason. . There may be condensation in the drive. Remove the disc and leave the drive open for approximately one hour. Remove the battery while you wait for the condensation to disappear. Hardware Guide Hardware Guide Using your VAIO computer 35 Using PC Cards Your computer includes one or two PC Card slots (depending on your model) . PC Cards allow you to connect nNportable external devices. Please see your printed Specifications sheet to see if your computer has one or two PC Card slots. You do not need to shut down your computer when inserting a PC Card. Inserting a PC Card To insert a PC Card, proceed as follows: 1 Insert the PC Card into one of the PC Card slots with the front label facing upwards. 2 Gently push the PC Card slot into the connector. The PC Card is automatically de...
Otros modelos de este manual:Notebooks - PCG-TR2MP (1.7 mb)
Notebooks - PCG-Z1XEP (1.7 mb)
Notebooks - PCG-Z1XMP (1.7 mb)
Notebooks - PCG-Z1XSP (1.7 mb)