Votos - 3, Puntuación media: 4 ( )

Fabricar: Toshiba Tamaño del archivo: 3.47 mb Nombre del archivo: Idioma del manual:

If you have Hibernation mode enabled (the default), the computer copies the details of your open programs and files to the hard disk before shutting down. Setting battery alarms Your computer can be configured to warn you when the battery is running low. You can set multiple alarms. Each alarm can be set to alert you when a specified percentage of remaining battery power has been reached. You can set how the warning occurs: sound an alarm, display a message, both, or none. You can also set the computer to enter Stand By mode or Hibernation mode, or to Turn Off when the alarm goes off. To set an alarm: 1 Click Start, then click Control Panel. The Control Panel appears. 2 Click the Performance and Maintenance icon. 3 Click the Toshiba Power Management icon. 4 Click the Alarm tab and set the alarm, as desired. Mobile Computing Mobile Computing Changing the main battery Changing the main battery When your battery power is running low, you have two options: connect the computer to an AC power source or install a charged battery. NOTE: If your battery discharges fully, your information will be lost. Be sure to save your work often. CAUTION: When handling a battery, be careful not to drop it or short-circuit its terminals. Removing the battery from the computer 1 Save your work. 2 Turn off the computer or place it in Hibernation mode according to the instructions in “Using Hibernation” on page 102. 3 Remove all cables connected to the computer. 4 Close the display panel and turn the computer upside down with the front of the computer facing you. Mobile Computing Mobile Computing Changing the main battery Sliding the battery release latch 5 Carefully slide the battery release latch toward the center of the computer. Sliding the battery out 6 While holding the battery release latch toward the unlocked position, use the adjacent half-oval finger slot nearby to gently pull the battery pack free. WARNING: If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately following the advice in “Disposing of used batteries safely” on page 119. Mobile Computing Mobile Computing Changing the main battery Inserting a charged battery 1 Wipe the battery terminals of the charged battery with a clean cloth to ensure a good connection. 2 With the battery release latch pulled toward the unlocked position, insert the battery from the back end first at a slight angle so that end fits evenly with the surrounding casing. If the back end has been correctly inserted, you will be able to gently press the front end into place until it snaps shut. If the front end resists, don’t force it. Simply start over. Inserting the battery CAUTION: Failure to lock the battery cover can result in the battery falling out of the computer case. 3 Turn the computer right side up. 4 Reconnect any cables you removed. 5 Turn on the computer. Mobile Computing Mobile Computing Changing the main battery Safety precauti...

Descargar ahora

Introduzca dos números de la imagen: