Votos - 1, Puntuación media: 5 ( )

Fabricar: Toshiba Tamaño del archivo: 3.15 mb Nombre del archivo: Idioma del manual:

90 90 90 Playing a CD or DVD The next track button skips to the following track on the disc. You can eject a disc by pressing the stop/eject button twice. Use this method to eject a disc when the computer is turned off and the sound subsystem is turned on. NOTE: If you have set a password for logging onto your system, your computer will start up and you will need to log on before being able to play a CD or DVD. CD/DVD and Digital audio modes The following chart describes CD/DVD mode and Digital audio mode. CD /DVD mode Digital audio mode Power is off and you press Play/ Pause If a CD is in the drive, the system enters CD player mode and operates as a stand-alone CD player. If a DVD is in the drive, the operating system starts and the DVD player starts. The operating system starts, the Windows MediaTM Player starts and the digital audio files begin to play. CD/DVD player mode and you press the CD/ DVD mode button DVD-ROM drive power turns off Learning the Basics Learning the Basics Playing a CD or DVD press Play/ Pause Operating system is running and you If a DVD is in the drive, WinDVDTM starts and the If a CD is in the drive, the Windows MediaTM Player starts and the digital audio files begin to play. DVD begins to play. CD /DVD mode Windows MediaTM Player starts and the digital audio files begin to play. Digital audio mode CAUTION: Do not install or remove a memory module while the DVD-ROM drive power is on. Inserting a disc WARNING: Before playing an audio CD or a DVD, turn the volume down. Playing the disc at maximum volume could damage your ears. To turn the volume down, use the volume control dial or access the Volume Control program (click Start, All Programs, Accessories, Entertainment, Volume Control). 1 If the computer is turned on, press the eject button on the DVD-ROM or DVD-ROM/CD-RW drive. Eject button 92 92 92 Playing a CD or DVD The disc tray partially opens. CAUTION: To avoid damaging a disc or losing data, check that the disk/disc activity light is off before opening the disc tray. 2 Grasp the disc tray and pull it fully open. 3 Hold the disc by its edges and check that it is clean and free of dust. CAUTION: Handle discs carefully. Avoid touching the surface of the disc. Grasp it by its center hole and edge. If you handle the disc incorrectly, you could lose data. 4 Carefully place the disc in the empty tray with its label facing up. Inserting a disc CAUTION: Be careful not to touch the drive’s lens (located underneath the drive’s spindle) or the area around it. Doing so could cause the drive to malfunction. 5 Gently press the center of the disc onto the spindle until it locks into place. Learning the Basics Learning the Basics Playing a CD or DVD Spindle Correct position Disc Incorrect position Incorrect position Positioning the disc on the spindle CAUTION: Make sure the disc is properly positioned on the spindle. If you position the disc incorrectly, it can jam the disc tray. 6 Close t...

Descargar ahora

Introduzca dos números de la imagen: