Votos - 4, Puntuación media: 3.5 ( )

Fabricar: Toshiba Tamaño del archivo: 4.02 mb Nombre del archivo: Idioma del manual:

54 54 54 Using the computer for the first time The hard disk drive indicator flashes to indicate that the hard disk drive is currently in use. Never turn off the computer while any drive is in use. Activating the power-on password When you first turn on your computer, no password is required. But you can set up your computer so that a password is required to complete the powering up process in the future. To activate the power-on password: 1 Double-click the TOSHIBA Console icon on the desktop. The TOSHIBA Console window appears. For more information see “TOSHIBA Console” on page 194. 2 Click Security. 3 Click User password. 4 Follow the on-screen instructions. The password requirement becomes active the next time you turn on your computer. When the feature is active, you must enter the password during the power-on process. After typing your password, press the Enter key. If the password is correct, the power-on process continues. If the password is incorrect, you will be prompted to try again. If you forget your power-on password and therefore cannot turn on your computer, take your computer to a Toshiba authorized service center for help. Getting Started Getting Started Using the computer for the first time After the third incorrect password submission, the system automatically shuts down. Using the TouchPad™ The TouchPad, the small, smooth square cutout located in front of the keyboard, is sensitive to touch and enables you to move the cursor with the stroke of a finger. Simply move your finger on the TouchPad in the direction you’d like to move the cursor: . To move the cursor to the top of the page, push your finger forward on the TouchPad. . To move the cursor to the bottom of the page, drag your finger toward yourself. . To move the cursor to the right side of the page, slide your finger across the TouchPad from left to right. . To move it to the left side, slide your finger from right to left. Because the TouchPad is much smaller than the display screen, moving your cursor across the screen often means having to move your finger several times across the TouchPad in the preferred direction. Once you have positioned your cursor, you can either click it into place by double-tapping the TouchPad or clicking the control buttons. For more on the TouchPad, see “Lesson 2: Using the TouchPad and control buttons together” on page 136. You can disable or enable the TouchPad. See “Disabling or enabling the TouchPad” on page 56. 56 56 56 Using the computer for the first time Control buttons The control buttons are below the TouchPad and are used like the buttons on a mouse. The primary control button is the button on the left and corresponds to the left mouse button. To double-click, press the primary button twice in rapid succession. The secondary control button is the button on the right and corresponds to the right mouse button. Check your program’s documentati...

Descargar ahora

Introduzca dos números de la imagen: