Votos - 3, Puntuación media: 4 ( )

Fabricar: Toshiba Tamaño del archivo: 3.77 mb Nombre del archivo: Idioma del manual:

Try replacing it. The battery does not power the computer for as long as it used to. If you frequently recharge a partially charged battery, it may not charge fully. Let the battery discharge completely, then try charging it again. Check the power options using the Power Management utility. Have you added a device, such as a PC Card or memory module, that takes its power from the battery? Is your software using the hard disk more? Is the display power set to turn off automatically? Was the battery fully charged to begin with? All these conditions affect how long the charge lasts. Keyboard problems If, when you type, strange things happen or nothing happens, the problem may be related to the keyboard itself. These are some typical problems and recommended solutions: The keyboard produces unexpected characters. A keypad overlay may be on. If the numeric keypad or cursor control light is on, press Fn and F10 simultaneously to turn off the cursor control light or press Fn and F11 simultaneously to turn off the numeric keypad light. If Something Goes Wrong If Something Goes Wrong Resolving a hardware conflict If the problem occurs when both the keypad overlays are off, make sure the software you are using is not remapping the keyboard. Refer to the software’s documentation and check that the program does not assign different meanings to any of the keys. You have connected an external keyboard and the operating system displays one or more keyboard error messages. If you have a second keyboard, try it. If it works, the first keyboard may be defective or incompatible with your computer. Display problems These are some typical problems and recommended solutions: The display is blank. Display Auto Off may have gone into effect. Press any key to activate the screen. You may have activated the instant password feature by pressing Fn and F1 simultaneously. If you have registered a password, press the Enter key, type the password and press Enter. If no password is registered, press Enter. The screen reactivates and allows you to continue working. If you are using the built-in screen, make sure the display priority is not set for an external monitor. To do this, hold the Fn key and press F5 twice. A window with display choices pops up. Hold the Fn key and press F5 twice again to advance through the display options. If you are using an external monitor: . Check that the monitor is turned on. . Check that the monitor’s power cable is firmly plugged into a live electrical outlet. If Something Goes Wrong If Something Goes Wrong Resolving a hardware conflict . Check that the cable connecting the external monitor to the computer is firmly attached. . Try adjusting the contrast and brightness controls on the external monitor. . Press Fn and F5 simultaneously to make sure the display priority is not set for the built-in screen. The screen does not look right. You can change the display settings by clicking a blank area of the desktop with the secondary...

Descargar ahora

Introduzca dos números de la imagen: