Votos - 3, Puntuación media: 4.7 ( )

Fabricar: Toshiba Tamaño del archivo: 3.98 mb Nombre del archivo: Idioma del manual:

56 56 Getting Started Adding memory (optional) 3 Gently lift the memory module to a 30-degree angle and slide it out of the slot. Front of computer (Sample Illustration) Removing the memory module 4 Replace the memory module slot cover and secure it using the screws. 5 Re-insert the main battery. For more information on inserting the main battery, see “Inserting a charged battery” on page 117. 6 Turn the computer right side up. 7 Reconnect the cables. 8 Restart the computer. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work. Checking total memory When you add or remove a memory module, you can check that the computer has recognized the change. To do this: 1 Click Start, Control Panel, and then System. The System window appears. 2 The total memory is displayed below the System heading under Memory (RAM). If the computer does not recognize the memory configuration, turn off the computer and remove the memory module slot cover (complete steps 1-8 in “Installing a memory module” on page 49), and then check that the module is inserted completely into the socket and lined up squarely with the socket latches. Getting Started 57 Hard Drive Recovery Utilities NOTE From time to time, Windows® will display a pop-up that says, “Windows® needs your permission to continue.” This is a security feature to prevent programs or people from doing things on your computer without your permission. If you were trying to perform the action, click Continue; otherwise, click Cancel. If unsure, cancel and try again. Hard Drive Recovery Utilities (Available on certain models) Your computer has been configured with a hard disk partition (available on certain models) to allow you to recover your hard disk drive or reinstall selected applications and software features or utilities. NOTE It is strongly recommended that you create recovery CDs/DVDs before using your system. For more information on creating Recovery media see “Creating Recovery CDs/DVDs” on page 58. Using the HDD Recovery, you can: . Create Hard Drive Recovery CDs or DVDs using a writable drive . Recover your hard disk drive to the factory-set default . Recover just your C: drive, leaving any other partitions you may have created intact, for example, a D: drive . Recover to a custom sized partition, leaving extra space to create an additional partition later . Erase the hard disk completely . Reinstall drivers and applications which were bundled with your computer 58 58 Getting Started Hard Drive Recovery Utilities Creating Recovery CDs/DVDs Depending on your system configuration, you may be able to copy the Hard Drive Recovery Utilities to CD or DVD which gives you the ability to recover your hard disk drive and recover your system if the hard drive recovery partition has been deleted or the hard disk has been replaced on your com...

Descargar ahora

Introduzca dos números de la imagen: