Votos - 3, Puntuación media: 3.3 ( )

Fabricar: Toshiba Tamaño del archivo: 3.54 mb Nombre del archivo: Idioma del manual:

Back of computer Slot A Slot B (Sample Illustration) Removing the memory module 60 60 4 Replace the memory module slot cover and secure it using the screw. 5 6 7 Re-insert the main battery. For more information on inserting the main battery, see “Inserting a charged battery” on page 120. Turn the computer right side up. Reconnect the cables. 8 Restart the computer. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work. Checking total memory When you add or remove a memory module, you can check that the computer has recognized the change. To do this: 1 Click Start, Control Panel, System and Maintenance, and then System. The System window appears. 2 The total memory is displayed below the System heading under Memory (RAM). If the computer does not recognize the memory configuration, turn off the computer and remove the memory module slot cover (complete steps 1-8 in “Installing a memory module” on page 53), and then check that the module is inserted completely into the socket and lined up squarely with the socket latches. NOTE From time to time, Windows® will display a pop-up that says, “Windows® needs your permission to continue.” This is a security feature to prevent programs or people from doing things on your computer without your permission. If you were trying to perform the action, click Continue; otherwise, click Cancel. If unsure, cancel and try again. Getting Started Getting Started Hard Drive Recovery Utilities Hard Drive Recovery Utilities (Available on certain models) Your computer has been configured with a hard disk partition to allow you to recover your hard disk drive or reinstall selected applications and software features or utilities. NOTE . During the HDD Recovery Process it is strongly recommended that your computer be connected to an external power source via the AC Adaptor. . It is also strongly recommended that you create recovery DVDs before using your system. For more information on creating Recovery media see “Creating Recovery DVDs” on page 61. Using the HDD Recovery, you can: . Create Hard Drive Recovery DVDs using a writable drive. . Recover your hard disk drive to the factory-set default. . Recover just your C: drive, leaving any other partitions you may have created intact, for example, a D: drive. . Recover your hard disk drive to the factory-set default without the HDD Recovery partition. . Reinstall drivers and applications which were bundled with your computer. Creating Recovery DVDs Depending on your system configuration, you may be able to copy the hard drive recovery to DVD which gives you the ability to recover your hard disk drive and recover your system if the hard drive recovery partition has been deleted or the hard disk has been replaced on your computer. NOTE The system will prompt you to insert the appropriate number of blank DVDs to copy the hard drive recovery. If your optical disc drive is not writable, contact Toshiba Customer S...

Descargar ahora

Introduzca dos números de la imagen: