Votos - 1, Puntuación media: 3 ( )

Fabricar: Toshiba Tamaño del archivo: 2.82 mb Nombre del archivo: Idioma del manual:

The Edit Plan Settings window appears. (Sample Image) Edit Plan Settings screen 3 Click Change advanced power settings. The Advanced settings tab of the Power Options window appears. 4 Double-click Power buttons and lid to display the actions that you can configure. (Sample Image) Advanced settings tab of Power Options screen 5 Select Hibernate for the options you want. Getting Started 91 Turning off the computer NOTE These options can be set separately for how they operate while the computer is running on battery power or while connected to AC power. . Lid close action Set this option to Hibernate if you want the computer to go into Hibernation mode when you close the display panel. . Power button action Set this option to Hibernate if you want the computer to go into Hibernation mode when you press the power button. 6 Click Apply. 7 Click OK. Once the computer is configured, you can place it into Hibernation mode by either pressing the power button or closing the display panel, depending on the Hibernation options set. Starting again from Hibernation mode To start up the computer from Hibernation mode, press the power button until the ON/OFF light glows white. The computer returns to the screen(s) you were using. If you put the computer in Hibernation mode by closing the display panel, you can start it again by opening the display panel. Using and configuring Sleep mode To turn off the computer using the Sleep command: 1 Click Start, and then click the arrow next to the Shut down button in the lower-right corner of the Start menu. Sleep Start button Arrow (Sample Image) Shut down menu 92 92 Getting Started Turning off the computer 2 Click Sleep in the pop-up menu. The computer saves the status of all open programs and files to the memory, turns off the display, and enters into a low-power mode. The ON/OFF light blinks amber indicating the computer is in Sleep mode. Configuring Sleep mode options You can place the computer into Sleep mode by either pressing the power button or closing the display panel. You can also specify an amount of time after which the computer automatically goes into Sleep mode. To use any of these methods, you first need to enable them using the Power Options feature. 1 Click Start, Control Panel, System and Security, and then Power Options. The Power Options window appears. 2 Click Change plan settings under the power plan to be customized. The Edit Plan Settings window appears. (Sample Image) Edit Plan Settings screen 3 To change the amount of time after which the computer enters Sleep mode: . Under Put the computer to sleep, select the desired amount of time in both the On battery and Plugged in categories. . To disable the computer from automatically entering Sleep mode, select Never. Getting Started 93 Turning off the computer 4 Click Change advanced power settings. The Advanced settings tab of the Powe...

Descargar ahora

Introduzca dos números de la imagen: