Votos - 2, Puntuación media: 5 ( )

Fabricar: Toshiba Tamaño del archivo: 4.07 mb Nombre del archivo: Idioma del manual:

TOSHIBA Presentation button Volume increase and decrease buttons (Sample Illustration) Media control buttons The TOSHIBA Presentation button allows the user to switch between two display options; “built-in display” and “built-in display/external monitor.” The Volume increase and decrease buttons allow you to increase/decrease the volume of the sound coming from the computer. Learning the Basics Learning the Basics Using the optical disc drive If your computer comes with a solid state drive (SSD) (available on certain models), under certain unusual conditions of prolonged non-use and/or exposure to high temperatures, your SSD may be vulnerable to data retention errors. Inserting an optical disc To insert an optical disc into the drive: 1 Make sure the computer is turned on. The drive will not open if the computer’s power is off. 2 Make sure the drive’s in-use indicator light is off. 3 Press the drive’s eject button. The disc tray slides partially out of the drive. 4 Grasp the tray and pull it fully open. (Sample Illustration) Drive tray fully extended 5 Hold the disc by its edges and check that it is free of dust. If the disc is dusty, clean it as described in “Caring for optical discs” on page 110. Learning the Basics Learning the Basics Using the optical disc drive 6 Place the disc carefully in the disc tray, label side up. (Sample Illustration) Positioning the disc in the drive 7 Gently press the disc onto the center spindle until it clicks into place. Handle DVDs and CDs carefully, making contact only with the center hole and edge. Do not touch the surface of the disc. Do not stack discs. If you incorrectly handle the discs, you could lose data. 8 Make sure the disc is completely on the spindle and is lying flat on the tray. If you insert the disc incorrectly, it may jam the drive. If this happens, contact Toshiba support for assistance. 9 Push the disc tray in by pressing gently on the center of the tray until it clicks into place. You are ready to use the disc. Playing an audio CD Insert an audio CD and close the disc tray. If the computer is turned on, the default player opens. . To play the CD or to pause, click the Play/pause button. . To stop the CD, click the Stop button. Learning the Basics Learning the Basics Using the optical disc drive Before putting on headphones to listen, turn the volume down. Do not set the volume too high when using headphones. Continuous exposure to loud sound can harm your hearing. Playing optical media If you insert an optical disc into the optical disc drive and the Auto- Run feature does not automatically start your disc, try launching the optical disc manually. To do this, follow these steps: 1 Click Start, and then Computer. 2 Double-click the optical disc drive icon. The drive will run the optical disc. If your disc does not run using this method, try using an application that is associated w...

Descargar ahora

Introduzca dos números de la imagen: