Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
This password does not encrypt data on the hard disk. ❖ Setting a hard disk drive master password lets you bypass the hard disk drive user password and access your hard disk, in case you forget the hard disk drive user password. If you choose to set a hard disk drive master password, you should set it before you set a hard disk drive user password. HINT: The hard disk drive shipped with your computer may not support the master password feature. When you attempt to set master password protection, your computer may alert you that this feature is not supported by your drive. If this happens and you want to establish a master password for your hard disk, contact your network administrator for instructions. Keeping Your Files Safe Hard disk drive passwords Setting a hard disk drive user only password in System Setup I caution! If you choose to set a hard disk drive user password, we strongly recommend that you set a hard disk drive master password as well (see “Setting a hard disk drive master and user password in System Setup” on page 195 for more information). If you set a hard disk drive user password and later forget the password, YOU WILL NEVER BE ABLE TO ACCESS YOUR HARD DISK AGAIN, unless you've set a hard disk drive master password. Toshiba is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access the hard drive. To register a user only password in System Setup: 1 Click Start, then click Shutdown, and click OK. The computer shuts down. 2 Hold down the Esc key and press and hold the power button until the on/off light on the system indicator panel illuminates (green) for approximately one second. When the following message appears on the screen: “Check system, Then press [F1] key,” press F1. The System Setup screen appears. 3 Press H to move to the HDD PASSWORD section on the screen. 4 Press the spacebar to select User Only password mode. 5 Press an arrow key to move to the User Password option. 6 Press the spacebar, then type a password of 1 to 16 characters and press Enter. You may use any combination of letters and numbers in your password. Keeping Your Files Safe Hard disk drive passwords 7 When System Setup prompts you to verify the password, type it again and press Enter. If the two passwords match, System Setup displays: Registered. If the two passwords do not match, an error message appears. Repeat step 6 and step 7 to enter the password again. 8 Press End to save the change. 9 When System Setup prompts you to confirm your change, press Y. Deleting or changing a hard disk drive user only password in System Setup To delete or change a user only password in System Setup: 1 Click Start, then click Shutdown, and click OK. The computer shuts down. 2 Hold down the Esc key and press and hold the power button until the on/off light on the system indicator panel illuminates (green) for approximately one second. When the following message appears on the screen: “Check system, Then press [F1] key,” press F1. The System Setup screen appears. 3 Press H to move to the HDD PASSWORD section on the screen. 4 Press the spacebar, then type in your user password and press Enter. 5 If you want to change the password, input the new password. If you want to delete the password, proceed to step 7. 6 When System Setup prompts you to verify the password, type it again and press Enter. Keeping Your Files Safe Hard disk drive passwords If the two passwords match, System Setup displays: Registered. If the two passwords do not match, an error message appears. Repeat step 5 and step 6 to enter the password again. 7 If you want to delete the user password, leave the space blank and press Enter twice. System Setup displays: Not Registered. 8 Press End to save the change. 9 When System Setup prompts you to confirm your change, press Y. Setting a hard disk drive master and user password in System Setup I caution! Make sure you choose a hard disk drive master password you can remember easily. If you set a hard disk drive user password and later forget the password or lose your password diskette, you will need to enter the hard disk drive master password in order to access your hard disk. To register master and user passwords in System Setup: 1 Click Start, then click Shutdown, and click OK. The computer shuts down. 2 Hold down the Esc key and press and hold the power button until the on/off light on the system indicator panel illuminates (green) for approximately one second. When the following message appears on the screen: “Check system, Then press [F1] key,” press F1. The System Setup screen appears. 3 Press H to move to the HDD PASSWORD section on the screen. Keeping Your Files Safe Hard disk drive passwords 4 Press the spacebar to select Master + User password mode. 5 Press an arrow key to move to the Master Password section. You must register a Master Password first. 6 Press the spacebar, then type a password of...
Otros modelos de este manual:Notebooks - M2 (3.66 mb)