Iniciar sesión:
Votos - 2, Puntuación media: 3 ( )

Manual de usuario Toshiba, modelo Tecra R940-S9420

Fabricar: Toshiba
Tamaño del archivo: 3.72 mb
Nombre del archivo:
Idioma del manual:
Enlace gratuito para este manual disponible en la parte inferior de la página



Otros manuales para este modelo:

Resumen del manual


The battery pack's internal protective device could fail, causing it to overheat or ignite, resulting in caustic liquid leakage, or explosion or fire, possibly resulting in death or serious injury. TECHNICAL NOTE: To avoid losing any data, save your files and then either completely shut down your computer or put it into Hibernation mode before changing the main battery. Removing the battery from the computer To remove the battery: 1 Save your work. 2 Turn off the computer. see “To Shut down your computer” on page 41. 3 Unplug and remove any cables connected to the computer, including the AC adaptor. 4 Close the display panel and turn the computer upside down. 5 Slide the battery release lock to the unlocked position. (Sample Illustration) R940—Unlocking the battery release lock 96 Mobile Computing Changing the main battery (Sample Illustration) R950—Unlocking the battery release lock 6 Slide and hold the battery release latch to release the battery. 7 Pull the discharged battery out of the computer. (Sample Illustration) R940—Removing the battery (Sample Illustration) R950—Removing the battery 97 Changing the main battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately. Always dispose of used battery packs in compliance with all applicable laws and regulations. Put insulating tape, such as cellophane tape, on the electrode during transportation to avoid a possible short circuit, fire or electric shock. Failure to do so could possibly result in serious injury. Inserting a charged battery To insert a battery: 1 Wipe the terminals of the charged battery with a clean cloth to ensure a good connection. 2 Insert the charged battery into the slot until the latch clicks. The battery pack has been designed so that you cannot install it with reverse polarity. If the battery does not slide into the slot easily, move the battery release lock to the unlocked position and try again. Do not force the battery into position. (Sample Illustration) R940—Inserting the battery (Sample Illustration) R950—Inserting the battery 98 98 98 Taking care of your battery 3 Slide the battery release lock to the locked position. (Sample Illustration) R940—Locking the battery release lock (Sample Illustration) R950—Locking the battery release lock 4 Turn the computer right side up. 5 Reconnect any cables that were removed in step 3 of “Removing the battery from the computer” on page 95. 6 Restart the computer. Taking care of your battery The following sections offer tips on how to take care of your battery and prolong its life. Safety precautions . If the battery pack produces an odor, overheats or changes color or shape while it is being used or charged, turn off the computer’s power immediately and disconnect the power cord/cable from the power socket. Carefully remove the battery pack from the computer. . Do not try to disassemble a battery pack. . Do not overcharge or reverse charge a b...

Otros modelos de este manual:
Notebooks - Tecra R940-BT9400 (3.72 mb)
Notebooks - Tecra R940-Landis-PT439U-028005 (3.72 mb)
Notebooks - Tecra R940-Landis-PT439U-02T005 (3.72 mb)
Notebooks - Tecra R940-S9421 (3.72 mb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría