Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
For additional safety best practices information, see the Regulatory Compliance Homepage at CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer). CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer. 1 optical drive 2 screw 3 plastic scribe 4 notch 5. Replace the battery (see Replacing the Battery). Back to Contents Page CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. Back to Contents Page Palm Rest Dell™ Inspiron™ N5010/M5010 Service Manual Removing the Palm Rest Replacing the Palm Rest Removing the Palm Rest 1. Follow the instructions in Before You Begin. 2. Remove the battery (see Removing the Battery). 3. Remove the base cover (see Removing the Base Cover). 4. Remove the memory module(s) (see Removing the Memory Module(s)). 5. Remove the optical drive (see Removing the Optical Drive). 6. Remove the four rubber screw caps that cover the screws. 7. Remove the seven screws that secure the palm rest to the computer base. WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer). CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer. 8. Remove the keyboard (see Removing the Keyboard). 9. Disconnect the touch pad cable, status light cable, and power button cable from the connectors on the system board. 10. Remove the five screws that secure the plam rest to the system board. 11. Slide a plastic scribe between the computer base and the palm rest and pry out the palm rest off the computer base. Replacing the Palm Rest 1. Follow the instructions in Before You Begin. 2. Slide the tabs on the palm rest into the slots on the computer base and gently snap the palm rest into place. 3. Replace the five screws that secure the plam rest to the system board. 4. Connect the touch pad cable, status light cable, and power button cable to the connectors on the system board. CAUTION: To avoid damage to the connectors, lift the connector latch and then remove the cables. 1 touch pad cable connector 2 screw 3 palm rest 4 status light cable connector 5 power button cable connector CAUTION: Carefully separate the palm rest from the computer base to avoid damage to the palm rest. 1 palm rest 2 plastic scribe 5. Replace the keyboard (see Replacing the Keyboard). 6. Turn the computer over and replace the seven screws that secure the palm rest to the computer base. 7. Replace the four rubber screw caps that cover the screws. 8. Replace the optical drive (see Replacing the Optical Drive). 9. Replace the memory module(s) (see Replacing the Memory Module(s)). 10. Replace the base cover (see Replacing the Base Cover). 11. Replace the battery (see Replacing the Battery). Back to Contents Page CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. Back to Contents Page Battery Dell™ Inspiron™ N5010/M5010 Service Manual Removing the Battery Replacing the Battery Removing the Battery 1. Follow the instructions in Before You Begin. 2. Shut down the computer and turn it over. 3. Slide the battery lock latch to the unlock position. 4. Slide the battery release latch to the side. 5. Slide and lift the battery out of the battery bay. Replacing the Battery 1. Follow the instructions in Before You Begin. 2. Align the tabs on the battery with the slots on the battery bay. 3. Slide the battery into the battery bay until it clicks into place. 4. Slide the battery lock latch to the lock position. Back to Contents Page WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorize...