Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
1 battery release latch 2 battery 3 battery lock latch Back to Contents Page Speakers Dell™ Inspiron™ N5010/M5010 Service Manual Removing the Speakers Replacing the Speakers Removing the Speakers 1. Follow the instructions in Before You Begin. 2. Remove the battery (see Removing the Battery). 3. Follow the instructions from step 3 to step 13 in Removing the System Board. 4. Remove the speakers from the latches that secure the speakers to the computer base. 5. Make note of the speaker cable routing and lift the speakers along with the cable, off the computer base. Replacing the Speakers 1. Follow the instructions in Before You Begin. 2. Align the speakers with the latches on the computer base and place the speakers in place. 3. Route the speaker cable into the routing guides. 4. Follow the instructions from step 6 to step 17 in Replacing the System Board. 5. Replace the battery (see Replacing the Battery). WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer). CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer. 1 speakers (2) 2 speaker cable CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. Back to Contents Page Back to Contents Page System Board Dell™ Inspiron™ N5010/M5010 Service Manual Removing the System Board Replacing the System Board Entering the Service Tag in the BIOS Removing the System Board 1. Follow the instructions in Before You Begin. 2. Remove the battery (see Removing the Battery). 3. Remove the base cover (see Removing the Base Cover). 4. Remove memory module(s) (see Removing the Memory Module(s)). 5. Remove the optical drive (see Removing the Optical Drive). 6. Remove the keyboard (see Removing the Keyboard). 7. Remove the palm rest (see Removing the Palm Rest). 8. Follow the instructions in step 8 and step 9 in Removing the Hard Drive. 9. Remove the Mini-Card (see Removing the Mini-Card). 10. Remove the Bluetooth module (see Removing the Bluetooth Module). 11. Disconnect the display cable, VGA connector board cable, speaker cable, and Media Card Reader board cable from the connectors on the system board. 12. Remove the two screws that secure the system board assembly to the computer base. WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer). CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer. 1 VGA connector board cable connector 2 display cable connector 3 screws (2) 4 Media Card Reader board cable connector 13. Lift the system board assembly to disconnect connector on the system board from the connector on the I/O board and lift the system board assembly off the computer base. 14. Turn the system board assembly over. 15. Remove the coin-cell battery (see Removing the Coin-Cell Battery). 16. Remove the processor heat sink (see Removing the Processor Heat Sink). 17. Remove the processor module (see Removing the Processor Module). Replacing the System Board 1. Follow the instructions in Before You Begin. 2. Replace the processor module (see Replacing the Processor Module). 3. Replace the processor heat sink (see Replacing the Processor Heat Sink). 4. Replace the coin-cell battery (see Replacing the Coin-Cell Battery). 5. Turn the system board assembly over. 6. Align the connectors on the system board with the slots on the computer base. 7. Gently press the system board to connect the connector on the system board to the connector on the I/O board. 8. Replace the two screws that secure the system board assembly to the computer base. 9. Connect the display cable, VGA connector board cable, speaker cable, and Media Card Reader board cable to the connectors on the system board. 10. Replace the Bluetooth module (see Replacing the Bluet...