Votos - 0, Puntuación media: 0 ( )

Fabricar: Dell Tamaño del archivo: 3.99 mb Nombre del archivo: Idioma del manual:

Otros manuales para este modelo:

Notebooks - Latitude E6420 XFR (686.54 kb)

Notebooks - Latitude E6420 XFR (681.62 kb)

Notebooks - Latitude E6420 XFR (1.79 mb)

3. Follow the procedures in After Working on Your Computer. 39.5 Removing the Battery Door NOTE: Removal of the battery door requires a security screw driver with a triangle head. These are available with the battery door kit. 1. Follow the procedures in Before Working on Your Computer. 2. Open the door to relieve hinge pressure. 3. Remove the four M3 x 3-mm screws from the bottom of the base assembly. 39.6 Replacing the Battery Door 1. Insert door hinge onto assembly and align the hinge divots. 2. Replace the four M3 x 3-mm triangle security screws. 3. Follow the procedures in After Working on Your Computer. Power Door.jpg 39.7 Removing the Power and/or LAN Door 1. Follow the procedures in Before Working on Your Computer. 2. Open the door to relieve hinge pressure. 3. Remove the one M2.5 x 5-mm screw and the one M3x3 mm screw securing the hinge to the base assembly 4. Remove the LCD Channel cover then remove the door. 39.8 Replacing the Power and/or LAN Door 1. Insert door hinge onto assembly and align the hinge divots. 2. Insert LCD Channel Cover. 3. Install and tighten the one M2.5 x 5-mm screw to secure the LCD Channel cover 4. Follow the procedures in After Working on Your Computer. VGA Door.jpg output ports1.jpg 39.9 Removing the VGA/Serial Door 1. Follow the procedures in Before Working on Your Computer. 2. Open the door to relieve hinge pressure. 3. Remove the two M3 x 3-mm screws from the bottom of the base assembly. 39.10 Replacing the VGA/Serial Door 1. Insert door hinge onto assembly and align the hinge divots. 2. Replace the two M3 x 3-mm screws. Follow the procedures in After Working on Your Computer. 39.11 Removing the VGA Panel Cover 1. Follow the procedures in Before Working on Your Computer. 2. Open the VGA door. HDD Door.jpg 3. Remove the two VGA Connector jack screws and the two Serial Connector jack screws. 4. Place a scribe in the small opening and pull to remove. 39.12 Replacing the VGA Panel Cover 1. Place the VGA Panel Cover in place over the VGA port. 2. Replace the two VGA connector jack screws and the two Serial connector jack screws.. 3. Follow the procedures in After Working on Your Computer. 39.13 Removing the HDD Door 1. Follow the procedures in Before Working on Your Computer. 2. Open the door to relieve hinge pressure. 3. Remove the two M3 x 3-mm screws securing the door hinges to the base assembly 39.14 Replacing the HDD Door 1. Insert door hinge onto assembly and align the hinge divots. 2. Replace the two M3 x 3-mm screws. 3. Follow the procedures in After Working on Your Computer. cid:image003.gif@01C8789B.35DDEE20 cid:image001.gif@01C8789B.35DDEE20 40 System Setup 40.1 Setup Overview System Setup allows you to: • change the system configuration information after you add, change, or remove any hardware in your computer. • set or change a user-selectable option such as the user password. • read the current amount of memory or set the type of hard drive installed. Before you use System Setup, it is recommended that you write down the System Setup screen information for future reference. CAUTION: Unless you are an expert computer user, do not change the settings for this program. Certain changes can cause your computer to work incorrectly.. Entering System Setup 1. Turn on (or restart) your computer. 2. When the blue DELL logo is displayed, you must watch for the F2 prompt to appear. 3. Once the F2 prompt appears, press immediately. NOTE: The F2 prompt indicates that the keyboard has initialized. This prompt can appear very quickly, so you must watch for it to display, and then press . If you press before you are prompted, this keystroke will be lost. 4. If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop. Then, shut down your computer and try again. 40.2 System Setup Menu The following sections describe the menu options for the System Setup program: General Option Description System Information This section lists the primary hardware features of your computer. • System Information • Memory Information • Processor Information • Device Information Battery Information Displays the battery status and the type of AC adapter connected to the computer. Boot Sequence Allows you to change the order in which the computer attempts to find an operating system. • Diskette Drive • Internal HDD • USB Storage Device • CD/DVD/CD-RW Drive • Onboard NIC • Cardbus NIC You can also choose the Boot List option. The options are: • Legacy • UEFI cid:image001.gif@01C8789B.35DDEE20 cid:image001.gif@01C8789B.35DDEE20 Date/Time Allows you to change the date and time. System Configuration NOTE: System Configuration contains options and settings related to integrated system devices. Depending on your computer and installed devices, the items listed in this section may or may not appear. Option Description Integrated NIC Allows you to configure the integrated network controller. The options are: • Disabled • Enabled • En...

Descargar ahora

Introduzca dos números de la imagen: