Votos - 3, Puntuación media: 5 ( )

Fabricar: Sony Tamaño del archivo: 1.94 mb Nombre del archivo: Idioma del manual:

To return to normal mode Press any key. Using Your Notebook Computer Using Power Saving Modes 51Using Your Notebook Computer Using Power Saving Modes 51nN Sony Notebook Computer User Guide . If you press the power button for more than four seconds, the computer will turn off. . When the computer is in System Suspend or System Hibernation mode, you cannot insert a disc. System Suspend Mode The computer saves the current state of the system in RAM and switches off power to the CPU. The amber power light flashes in this mode. To activate System Suspend mode Press Fn+ Esc, or press the power button quickly. You can also use the PowerPanel utility to enter System Suspend mode. To return to normal mode Press any key. System Hibernation Mode The state of the system is saved on the hard disk and power is turned off. The power indicator light is off in this mode. To activate System Hibernation mode Press Fn+ F12. You can also use the PowerPanel utility to enter System Hibernation mode. To return to normal mode Turn on the computer by pressing the power button. The computer returns to its previous state. . Steps to return to normal mode: System hibernation b System suspend b System Idle System suspend requires less time than System hibernation. . Power consumption: System idle b System suspend b System hibernation System idle uses more power than System hibernation. Sony Notebook Computer User Guide Using Your Notebook Computer Using a Second Battery Pack 52Using Your Notebook Computer Using a Second Battery Pack 52nN Using a Second Battery Pack You can purchase a second rechargeable battery pack. With two battery packs, you can extend the time that you use your computer with battery power. When using two battery packs, the battery pack you insert first charges first. The battery pack you insert second charges when the first battery pack is 85 percent full. You can monitor which battery pack is charging by observing the battery indicator lights. To insert a second battery pack 1 If another device is in the multi-purpose bay, remove the device. See “ To remove the floppy disk drive” on page 38. 2 Insert the battery pack into the multi- purpose bay. The battery 2 indicator light turns on. . To determine the time the battery lasts, see “Displaying Battery information" in your Software Guide. . If you attach two battery packs, you can remove either of them without shutting down the computer. When removing one battery pack, make sure that the other battery pack's indicator is on. If the indicator of the battery pack you are going to remove is on, right-click on the task tray and click the "switch discharge battery" menu. Multi- purpose bay Battery pack Label facing down 3 Attach the Weight Saver to the computer to stabilize the battery pack. Slide the eject lever on the bottom of the Weight Saver toward the front of the computer to lock it. See also “Using the Weight Saver” on page 55. Using Your Notebo...

Descargar ahora

Introduzca dos números de la imagen: