Votos - 3, Puntuación media: 3.7 ( )

Fabricar: Sony Tamaño del archivo: 1.59 mb Nombre del archivo: Idioma del manual:

Some of the control items will not be visible if you open VAIO Control Center as a limited user. 121121nN Customizing Your VAIO Computer Using the Power Saving Modes When you use a battery as the power source for your computer, you can take advantage of power management settings to conserve battery life. In addition to the normal operating mode, which allows you to turn off specific devices, your computer has two distinct power saving modes: Standby and Hibernate. When using battery power, you should be aware that the computer automatically enters Hibernate mode when the remaining battery charge becomes short, regardless of the power management setting you select. ! If the battery level falls below 10 percent, you should either attach the AC adapter to recharge the battery or shut down the computer and install a fully charged battery. Using Normal Mode This is the normal state of the computer when it is in use. The green power indicator light is on in this mode. To save power while not working, you can turn off a specific device such as the LCD or the hard disk. 122122nN Customizing Your VAIO Computer Using Standby Mode Standby mode turns off the LCD screen and sets the hard disk and the CPU to a low power consumption mode. The umber power light flashes in this mode. To activate Standby mode 1 Click Start and then Turn Off Computer. 2 Click Stand By. To return to Normal mode Press any key. ! If you press the power button for more than four seconds, the computer will switch off automatically. You will lose any unsaved data. . When the computer is in Standby mode, you cannot insert a disc. The computer comes out of Standby mode quicker than out of Hibernate mode. Standby mode uses more power than Hibernate mode. ! If the battery runs down when the computer enters Standby mode, you will lose any unsaved data. Going back to the previous work state is impossible. To avoid loss of data, you should save your data frequently. If the computer is not used for 25 minutes, it will enter Standby mode. To avoid this, you can change the Standby mode settings. 123123nN Customizing Your VAIO Computer To change the Standby mode settings 1 Click Start and then Control Panel. 2 Click Performance and Maintenance. 3 Click Power Options. The Power Options Properties window appears. 4 Select the Power Schemes tab. 5 Change the System Standby settings. 124124nN Customizing Your VAIO Computer Using Hibernate Mode In Hibernate mode, the state of the system is saved on the hard disk and power is turned off. Even when the battery runs down, no data will be lost. The power indicator light is off in this mode. To activate Hibernate mode Press the Fn+F12 keys. The Hibernating screen appears and the computer enters Hibernate mode. Alternatively, 1 Click Start and then Turn Off Computer. 2 Click Hibernate. To return to Normal mode Turn on the computer by pressing the power button. The...

Descargar ahora

Introduzca dos números de la imagen: