Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Do not try to add, delete, or resize partitions unless you really need to. Changing partition settings might delete all your files on the hard disk. Using the product recovery CD-ROMs 100 nN About the software on your Sony notebook If you need to perform a system recovery, but do not want to lose all the data stored on your hard disk, copy all the files you want to keep on the D: drive. During the system recovery process, choose to keep the current partition information. Doing so will keep your D: drive unchanged after the recovery process. If you do need to change the size of your partitions, you can do so by choosing Option Recovery in the system recovery set- up process. In this case, it is important to be aware that all data on your hard disk will be deleted. If you need to keep existing files, make sure you back them up before performing the system recovery. Starting the system recovery procedure To start the system recovery, proceed as follows: 1 Turn on your computer (using AC power only) and insert the first system recovery CD-ROM into the disc drive. 2 If you are still able to access Windows ® , shut down your computer ( Start/ Turn Off Computer/ Turn off)* . 3 Wait 10 seconds then turn the computer back on. 4 The system starts to read the CD automatically and you are asked to wait. 5 Click Next in the window that appears. 6 Read the introduction and click Next. You can now choose the nature of the recovery. * If your system is severely damaged and you can no longer access Windows ® , you will have to turn off the computer by pressing the power button for longer than four seconds. Wait for ten seconds before pressing the button again to turn the power on. Using the product recovery CD-ROMs 101 nN About the software on your Sony notebook Recovering the system without changing partition sizes To completely restore the original software, drivers and settings on your computer without changing the partition sizes, choose the first option and apply a Default System Drive Recovery. Performing this recovery means that you will lose all the data stored on your C: drive, but data on your D: drive will remain. You should allow one hour for the recovery process. To perform the Default System Drive Recovery, proceed as follows: 1 Select the button next to Default System Drive Recovery ( Recommended) . 2 Click Next. You are asked if you are sure you want to recover the system. 3 To start the procedure, click Next. 4 Click Yes to confirm. The recovery process starts. 5 When asked to do so, remove the CD and insert the next one. 6 When the process is finished, click OK. 7 Click Next in the window that appears. 8 Remove the CD from the drive and click Finish. Your system is restored to its initial settings and reboots automatically. Recovering the system with modified partition sizes To have the option of changing the partition sizes before completely restoring the original software, drivers and settings on your computer, choose ...