LED operation, function and why they blink: Green on control panel Power LED indicator is lit when power to the unit is on. Blinking green on control panel LED blinks (2 times per second) indicating batteries are low. LED blinks (1 time per second) when the rake assembly has encountered a blockage. Green on ionizer Ionic air cleaner LED (behind the rake) is only lit when the ionizer is operating. Red on control panel Sleep timer LED is continually lit when sleep mode is activated. Blinking red o

• Press in on four corners of lid to secure lid to the waste receptacle, pull up from both sides making sure to hold lid and receptable together; lift out and dispose (W). Disposable waste receptacles are available in packages of 12 or 18 and may be purchased through your local retailer, by visiting us at our website at or by calling us at 1-800-738-0245. We will be happy to assist you in any way we can. Rake Removal & Cleaning Removing the rake: The rake can be removed for easy cleaning. We rec

This product is designed to make caring for your cat a simpler, less time-consuming process. OPERATING INSTRUCTIONS FOR THE LITTERMAID® SELF-CLEANING LITTER BOX • Cat enters the unit; once he/she leaves, the sensors are triggered, setting the timer for the cleaning cycle (sensors need to be blocked for at least 5 seconds). Important: Unit will not start a cleaning cycle while cat is in the box. • As soon as the cat leaves the litter box, the sensors activate the 10-minute countdown and the ionic

NOT INTENDED FOR USE WITH KITTENS UNDER SIX MONTHS. . Not intended for use by handicapped, incapacitated or older cats that might experience difficulty in entering or leaving the litter box. . PREGNANT WOMEN and IMMUNE-DEFICIENT PEOPLE should avoid contact with cat waste at all times. . CAUTION: THIS IS NOT A TOY. The LitterMaid® Self-Cleaning litter box is a precision-operated appliance. Should the rake become jammed during cleaning, THIS UNIT CONTAINS A MECHANISM THAT WILL AUTOMATICALLY STOP,

(Sensors need to be blocked for at least 5 seconds.) Important: Unit will not start a cleaning cycle while cat is in the box. • As soon as the cat leaves the litter box, the sensor activates the 10-minute countdown and the ionic air cleaner. • The ionic air cleaner stays on during the countdown and the cleaning cycle. • After the 10-minute countdown, the cleaning cycle starts and the rake scoops out the waste clumps. • If the cat reenters and leaves the litter box before the initial 10 minutes h

Important: Allow the kabana to dry thoroughly before reassembling it. Storing 1. Disassemble the LitterMaid Kitty Kabana™ and store in its box or in a clean, dry place. Applica’ Applica Consumer Products, Inc. Copyright © 2008 Applica Consumer Products, Inc. Made in People's Republic of China Printed in People's Republic of China 2008/6-13-62E LMT250/ LME9000MW/ LME9250

Important: Allow the kabana to dry thoroughly before reassembling it. Storing 1. Disassemble the LitterMaid Kitty Kabana™ and store in its box or in a clean, dry place. Applica’ Applica Consumer Products, Inc. Copyright © 2008 Applica Consumer Products, Inc. Made in People's Republic of China Printed in People's Republic of China 2008/6-13-62E LMT250/ LME9000MW/ LME9250

UTTEI\JVjXiD Kitty Kabana LITTER BOX COVER TM Models LMT25I :9000MW LME9250 Getting Started Make sure you have all of the parts listed below 1. Transparent tubes (2) 2. Metallic rod 3. Curved tubes (already preassembled in kabana) 4. Preassembled Kabana To Assemble A 1. Insert the metallic rod through the looped fabric located on top of the preassembled kabana (A). 2. Position the ends of the metallic rod over the curved tubes that are already preassembled inside the kabana (B).

Insert the kabana's 4 curved tube ends into the plug holes on the litter box's top housing, one at a time (E). 3. Lift the kabana's side flap to reveal the looped fabric on the inside of the kabana (F). 4. Insert the transparent tube through the looped fabric of the kabana (G). 5. Insert the transparent tube into the latch of the curved tube end on both ends of the kabana (H). 6. Repeat steps 3 - 5 to assemble the other side of the kabana. 7. Your LitterMaid Kitty Kabana™ is now fully assem