Votos - 1, Puntuación media: 4
(
)
)
|
Resumen del manual
The following is the LCD display that appears on your camera-see Figure 3. Located below are the LCD icons and their explanation. Figure 3 Self Timer: Use the Self Timer to allow for a time delay before the camera automatically takes a picture. What to do: Focus the camera on what you want to take the picture of. If a self -portrait, focus the camera on the spot where you plan to stand. Set the LCD display to Self Timer. Press the Shutter Button. The camera will beep for about 10 seconds allowing you time to get ready. The camera will delay a few seconds and then snap a picture. If at any time you want to stop the Self-Timer from engaging, press the Shutter Button within the 10 second countdown. SKU 91956 For technical questions, please call 1-800-444-3353. Page 4 What to do: What to do: LO What to do: Hi/LO Quality: The next icon after Continuous Snap Shot is the Hi/Lo Quality icon. If you move to the next icon after Hi//Lo Quality, either the LO icon will appear, meaning that the camera is in LO mode. If no icon shows, then the camera is in Hi mode. Hi Quality is for full resolution while LO quality is for 50% resolution. Press the Mode Button to change the mode, and press the Shutter Button to select mode. What to do: AVI: Auto Video Impression mode for shooting video. AVI frame rate is about 9 Feet Per Second. Press the Shutter Button to stop shooting in AVI mode. Select the Video mode to shoot video. Press the Shutter Button to capture continuous images. These will be stored in the memory until the Shutter Button is released. Note that shooting video will use memory but the picture number will only increase by one. What to do: Power Frequency: 60 is for 60 Hz and 50 for 50 Hz. Use the Mode Button to change to the desired frequency. Press the Shutter Button to confirm the power frequency. If a flicker effect occurs while using the Camera, changing the power frequency will eliminate the flickering. What to do: Delete Last/Delete All: The icon with an open trash can lid indicates that the last picture will be deleted. The open trash can lid with the words “ALL” indicate that all pictures in memory will be deleted. When you wish to get rid of the last picture taken, select the icon with the open trash can lid and no words. The icon with the open trash can and the word “ALL” will delete all of your pictures if selected. Note that when the Camera memory is full the LCD will display “FULL” and you cannot take any more pictures. If this occurs, you must either download your pictures or erase them. What to do: Battery Status: When your batteries are fully charged, the icon will appear as shown to the left. When your battery charge drops, the Camera will sound a buzzer and only one segment of the Battery Status icon will show. When the battery is completely exhausted, the icon will show as empty. Note that if the battery is not replaced the Camera will automatically turn itself OFF. You will no longer be able to use the Camera without a new battery. Check the Battery Status icon on a regular basis. When you note that the icon is showing only one segment, change the batteries immediately. SKU 91956 For technical questions, please call 1-800-444-3353. Page 5 What to do: Connect the USB cord to the USB port on your PC. The Camera will not function in Camera mode with the USB port plugged in. The LCD will indicate PC. Downloading and Editing The Digital Camera and Binocular comes with a program to run ULead® Photo Explorer® on your computer. Follow all instructions on the CD-ROM to install the program on your computer. Make certain that you follow all instructions in your PC Owner’s Manual. Follow all instructions for proper registration of your program. Connect the USB cord to the USB port on your PC. (See your computer’s instruction manual for USB port locations.) The Camera will not function in Camera mode with the USB port plugged in. The LCD will indicate PC. Once the program is installed and you want to get the images from the Camera’s memory you will need to follow some basis steps. 1. Run ULead® Photo Explorer®. 2. Click the “TWAIN Acquire” command from file menu. Select the source as “Dual Mode Camera 8008 VGA+.” 3. You will need to select the Device Settings to set the image quality in 50 or 60 Hz. Additionally, you may need to set the Anti-Flicker frequency. 4. Follow the directions that accompany this product and the CD-ROM. Maintenance 1. Never immerse the Digital Camera in any fluid. 2. Remove dust or stains with a soft cloth lightly dampened with water or special camera cleaning fluids. A special cleaning cloth is included for cleaning lenses. 3. Clean the lenses in circular motions and with as little fluid as possible. Make certain that any cleaning fluid used is approved for use on camera lenses. 4. Avoid using paper products such as paper towels to clean the lenses. These may scratch and damage the lens. 5. Store in a dry location out of the reach of children. SKU 91956 For technical questions, ple...
Otros modelos de este manual:Instrumentos de óptica - 91956 (1.21 mb)