Votos - 5, Puntuación media: 3
(
)
)
|
Resumen del manual
Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture for any damage and be sure all accessories necessary to operate the unit has arrived intact. In the case damage has been found or parts are missing, please contact our customer support number for further instructions. Do not return this unit to your dealer without first contacting customer support. Introduction: The ELAR EX TRIFLOOD is part of Elation Architectural ® continuing pursuit for creating high quality affordable intelligent fixtures. The ELAR EX TRIFLOOD is a powerful DMX intelligent RGB LED wash. This wash is light weight and compact which makes it a great piece for mobile DJ’s and clubs. The unit has 4 operating modes; Auto Run mode, Program mode, RGB mode, and DMX Controlled. This unit can be used as a stand alone unit or in a master-slave configuration. Customer Support: ©Elation® provides a customer support line, to provide set up help and to answer any question should you encounter problems during your set up or initial operation. You may also visit us on the web at for any comments or suggestions. Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m. Pacific Standard Time. Voice: (323) 582-3322 Fax: (323) 832-9142 E-mail: support@elationlighting.com Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture. Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, doing so will void your manufactures warranty. In the unlikely event your unit may require service please contact ©Elation customer support. PLEASE recycle the shipping carton when ever possible. ELAR EX TRIFLOOD User Instructions ©Elation Architectural® 6122 S. Eastern Ave. Los Angeles CA. 90040 Elation Architectural - - ELAR EX TRIFLOOD User Manual Page 2 5/10 ELAR EX TRIFLOOD Safety Precautions ELAR EX TRIFLOOD General Instructions • Be sure that the local power outlet match that of the required volt- age for your unit. • Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fire in case of an internal short. • Disconnect from main power before making any type of connection. • Do not remove the cover under any conditions. There are no user serviceable parts inside. • Never open this unit, it is factory sealed for a reason. • Never plug this unit in to a dimmer pack • Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between this device and a wall. • Do not attempt to operate this unit, if it becomes damaged. • During long periods of non-use, disconnect the unit’s main power. • Always mount this unit in safe and stable matter. • Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the point they exit from the unit. • Cleaning -The fixture should be cleaned only as recommended by t he manufacturer. See page 13 for cleaning details. • Heat -The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (inclu- d ing amplifiers) that produce heat. • The fixture should be serviced by qualified service personnel when: A. The power-supply cord or the plug has been damaged. B. Objects have fallen, or liquid has been spilled into the appliance. C. The appliance does not appear to operate normally or exhibits a marked change in performance. To optimize the performance of this product, please read these operating instructions carefully to familiarize yourself with the basic operations of this unit. These instructions contain important safety information regarding the use and maintenance of this unit. Please keep this manual with the unit, for future reference. ELAR EX TRIFLOOD Features • Multi-Colors • Tri LEDs - 3 LEDs Per Lens • Built in Microphone • 4 Operating Modes • DMX-512 protocol • 4 DMX Modes: 3 Channel Mode, 4 Channel Mode, 5 Channel & 6 Channel Mode • Dimming 0-100% in 4 Channel Mode, 5 Channel Mode, & 6 Channel Mode. • Daisy Chain Units Together in DMX Mode ELAR EX TRIFLOOD Warranty Registration The ELAR EX TRIFLOOD carries a two year limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return package. A brief description of the problem as well as the R.A. number must also be written down on a piece of paper included in the shipping carton. If the unit is under warranty, you must provide a copy...